User Manual
Table Of Contents
- Panel & Display
- Main Display
- Setup
- Basic Operation
- Sounds
- Styles
- Songs and Audio
- Phrase Pads
- Albums
- Demo
- Mixer
- Performance Memory
- DSP Effects
- Keyboard Part Effects
- Controllers
- Microphone
- Scale Tuning
- MIDI I/O
- USB Storage Devices
- Utility Settings
- Expansion
- Sound List
- Style List
- Song List
- Phrase Pad List
- Part Effect List
- Global Effect List
- Insert Effect List
- Chord List
- Controller Function List
- Short Cut+ Chart
- MIDI Implementation List
149
Controllers
Setting the Pitch Bend Range
You can set the Pitch Bend range by following steps:
1. Press the function name of the left or right direction and select Pitch Bend. Then, the range parameter will appear at
the bottom.
2. Press the Pitch Bend range and set the desired maximum value. You can then use the joystick to apply Pitch Bend
as you play.
Pitch Bend Range Lock
Dierent sounds in this instrument may have dierent ranges of pitch bend. If sounds with dierent ranges are added
to dierent parts and turned on at the same time, there may be a conict in pitch during playing and using the joystick.
Therefore, the system limits the pitch bend range. No matter how many parts you are playing at the same time, using
the joystick will always produce only the same bent pitch.
You need to pay attention to the following rules:
1. When you turn on only one sound part, the left and right directions of the joystick will respond to the default pitch
bend range of the sound.
2. If you turn on multiple parts at the same time, the pitch bend range will respond to the range according to the priority
of the part, which is R1->R2->L->R3. For example, if you turn on R1 and R2 at the same time, the system’s pitch
bend range will respond to the R1 sound. If you close the R1 and only turn on the R2, the system’s pitch bend range
will respond to the current R2 sound.
Of course, you can modify the current global pitch bend range at any time from the controller interface. However, after
switching sounds, this parameter will immediately change with the new sound.