User Manual

21
If you want to set the split point for both the left part and chord area, just turn on the “Chord+L” switch. Then you can
set the Split Point (Chord) and the Split Point (Left) at the same time.
Tips:
The Split Point of the LEFT/RIGHT part sections and the Chord Split Point section are generally the same,
but also can be assigned separately. Split Point (Chord) cannot be set higher than Split Point (Left).
Using Keyboard Latch
When you turn the Latch function on, the layer sound will continue playing after you remove your hand from the key-
board.
Select the part you want to latch in the “Latch” options.
• All O: The Latch function will not apply to any sound layers
• Left: The Latch function will only apply to the left part sound layer
• All On: The Latch function will apply to all sound layers
Sounds