User Manual

28
Keyboard Tab
This menu contains “Keyboard”, “Velocity”, and “Play Mode” parameters.
Keyboard Right Octave Determines the default octave shift of the edited sound when used as any of
the RIGHT 1-3 keyboard parts.
-2~+2
Left Octave Determines the default octave shift of the edited sound when used as the
LEFT keyboard part.
-2~+2
Panel Sustain Determines the length of sustain when using Panel Sustain. 64~127
Pedal Sustain Determines the length of sustain when using Pedal Sustain. 64~127
Velocity Slope Adjusts the velocity slope. 0~127
Oset Adjusts the time curves as the velocity varies. 0~127
Play Mode Poly Sets the sound to be played back with multiple simultaneous notes
(polyphonically).
Poly Portamento Sets the sound to be played back with multiple simultaneous notes
(polyphonically). Legato playing triggers the Portamento eect.
Mono Sets the sound to be played back with single notes only (monophonically).
Mono Portamento Sets the sound to be played back with single notes only monophonically).
Legato playing triggers the Portamento eect.
Mono Legato Sets the sound to be played back with legato, and without Portamento.
Portamento Time Sets the transition speed from the rst note played to the next, when the
playing mode is set to Portamento and the notes are played legato.
0~127
Tips:
If the play mode is set to “Mono”, only one sound will be produced at a time no matter how many keys you
play at the same time. When using the Harmony eect, you can still hear all harmony notes.
Portamento slides the pitch of one note played on the keyboard into the next note played. You can control
the transition time by adjusting the “Portamento Time”.
Legato is a special mode of monophonic playing. When you press a new key while already holding another
key, the rst note will immediately change to the second note played. Playing some stringed instruments with
Legato can be surprisingly realistic.
Sounds