User Manual

51
Styles
Maj This channel will only play when you use Major chords.
Min This channel will only play when you use Minor chords.
All This channel will play when you use either Major or Minor chords.
Non This channel does not respond to chords.
The number of available parameter options is related to the section being edited:
• When the editing section is Intro or Ending, Maj, Min, All, and Non are all available. This is because when creating an
Intro and Ending section, the channel response major chord and the channel response minor chord are separated.
When you play a major chord, channel 9~16 will be played; when you play a minor chord, channel 1~8 will be played.
When editing and recording Intro and Ending sections, please consider how the “Chord Type” relates to “Channel
selection”.
• When the editing section is Main, Fill, or Break, Maj and Min are not available. This is because the Percussion
channel of the Main, Fill, and Break sections needs to support all chords, and the percussion channel is not set up for
chords at all.
Note!
Remember that Style channels 1~8 and 9~16 use the same channel when played (1 and 9, for example). If
the two channels’ chord response are both set to All, but their other parameters (tone, volume, etc.) are dif-
ferent, there may be problems when playing the Style, and it may not play according to your settings. Make
sure the parameter settings are consistent with your Style during setup to avoid this issue.
Channel Volume
Press the volume value. Then press the Up and Down arrows, use the [DATA DIAL], or use the [<]/[>] buttons to adjust
the volume value.