User Manual

95
Recording New Phrase Pads
In addition to editing the preset Phrase Pad in this instrument, you can also create your own Phrase Pads. In the Phrase
Pad recording interface, click the “New” button at bottom right.
Press “RECORD”, the button will change to “START” and wait for record to start.
In the recording preparation state, click the screen or press the [PHRASE PAD] button on the panel to select the Phrase
Pad you want to record. At this point, the metronome will turn on automatically and you can adjust the tempo, sound,
pitch and so on.
You can play the keyboard, or press “START” in the screen, or press the panel [START/STOP] button to start recording.
The screen button will change to “STOP”. The [PHRASE PAD] button and the [PHRASE PAD SELECT] button on the
panel are not operable during recording.
After recording, click the “STOP” button on the screen or press the [START/STOP] button on the panel to stop record-
ing. Press the [PHRASE PAD STOP] button to stop recording.
You can record up to 32 bars on the current system.
At this point, you can listen and edit the parameters of recorded Phrase Pad.
Tips:
If your recorded phrase needs to respond to chords, try to record the internal notes in a CM7 chord. In this
way, the phrase will play normally under dierent chords.
Please note that each Phrase Pad recording will overwrite the previous recording, and it cannot be restored.
Due to the limitation of system resources, the IFX cannot be used in the Phrase Pad recording.
Phrase Pads