User Guide MC Concept 1170 II medemagroup P9-0270-B ver. 2.0.
Medema Production A/S Serial number: ______________________________ Delivery date: ________________ Year 20______ This vehicle was supplied by: User guide P9-0270-B Date: 2 of 56 / Version 2.0.
Medema Production A/S Contents Symbols.................................................................................. 4 Warning! ................................................................................. 4 Seat and backrest ................................................................. 5 Introduktion............................................................................ 6 Declaration of conformity ..................................................... 7 Part names .........................
Medema Production A/S Symbols Used in the manual to indicate sections describing situations where extra care is required owing to the risk of personal injury. Used to indicate sections on electromagnetic compatibility (EMC). Warning! For safety reasons the vehicle must not be lent to persons who are not completely familiar with it. The vehicle is designed for one person only. The MC Concept 1170 II has been designed for persons weighing up to 155 kg.
Medema Production A/S Seat and backrest All our seats and backrests are produced in materials resistant to ignition and tested according to ISO 7176-16. The cover of the seat and backrest can be washed in the washing machine. ALWAYS follow the washing instructions on the back of the seat pad / backrest. User guide P9-0270-B 5 of 56 Version 2.0.
Medema Production A/S Introduktion Congratulations on your new MC Concept 1170 II electric mobility scooter. You are now the owner of an electric mobility scooter developed for use indoors as well as outdoors. It is what is called a Class B vehicle according to the European classification of electric scooters. To get the best out of this vehicle - and to avoid breakdowns and accidents - we recommend that you read this User Manual carefully.
Medema Production A/S Declaration of conformity Medema Production A/S hereby declares that: Machine: MC Concept Use: (Prescribed use in User Manual) Model No: 1170 II Complies with the Medical Device Directive 93/42/EEC.. This product has been tested and approved according to standard EN 12184 electric wheelchairs, scooters and their chargers. The product is risk analysed in accordance with the harmonized standard DS/EN ISO 14971 - Medical devices - Application of risk management to medical devices.
Medema Production A/S Part names The part names given below refer to the descriptions later in the instruction manual.
Medema Production A/S Introduction DX2 DX2 is the first in a new generation of joysticks to control the electric wheelchair. With its large color LCD screen and its logical icon built menu structure, it directs the user to the target. Joystick parts Dynamic DX2 AJR 1 2 3 5 6 4 7 8 1 Start/stop button 2 Indicator left 3 Indicator right 4 Select 5 Display 6 Speed selector 7 Accessory Selector 8 Horn Operating At the top of the display you will find the status bar.
Medema Production A/S Clock on/off Press arrow up/down or joystick (push forward) until the above icon is showed in the center of the screen. Use ”Select” to switch between X and . Accept by pressing the arrow up/down button. User guide P9-0270-B 10 of 56 Version 2.0.
Medema Production A/S Set Speed When you turn the joystick on, the image shown below will be presented in the display. The number in the centre shows the speed you have chosen as max speed. Change the Speed by selecting the plus / minus key. Maximum speed is 5, lowest is 1. Chosen speed Select Find the features in the bottom with the “Select” button. Setting the seat - back and leg supports Chosen speed Select Press the arrow up / down until the image shows the chair.
Medema Production A/S Function Icon Seat angle (Tilt) Backrest angle Seat height Left footrest Right footrest footrest both Lying down Headrest Only the available options will be displayed. User guide P9-0270-B 12 of 56 Version 2.0.
Medema Production A/S Light on / off Push the arrow up / down until the image for light is shown in the centre. Push the joystick forward to turn the light on. And again to turn of the light. Push the joystick back to activate the hazard warning lights. Push the joystick back again to turn it of. Push the joystick right or left to activate the indicators right or left. Turn of the indicators by puching the joystick to the same side again.
Medema Production A/S Setting the display environment Use the arrows up /down until “day / night” icon i shown in the centre. Push the joystick forward to enter settings. The image below will show. 1 2 3 Exit / Cancel Exit / Cancel Setting Result 1 - Indoor The display will show a black background color. 2 - Outdoor The display will show a white background color. 3 - Automatic The background color will change (black/white) accordingly to the surrounding light.
Medema Production A/S Setting the Clock Use arrow up / down until the clock is shown in the centre. Push the joystick forward to enter settings. The image below will show. Press the Select button or push the joystick right / left to choose the digit to change. Joystick forward make the number count forward. Joystick back accept the new settings and return to the main menu. Arrow up / down dismiss the new settings and return to the main menu.
Medema Production A/S To unlock the DX system Press the on / off button. The system will show a lock in the display. Press the horn twice within 10 seconds. The system will boot normally. Error Code Code Cause Meaning 1 Could mean: - Errors in programming - Error in wire connection - Internal fault in a module DX Module Turn off the chair and turn on again. If it doesn’t works, contact qualified technician (HMC or therapist). 2 DX Accessory Could mean: - driving slowly because of raised seat.
Medema Production A/S Extra DX2 joystick can, using a DX Infra-red Interface Transmitter System, control all electronic equipment, that work via remote control with infrared light. Be it TV, radio, computer mice and other things. Accessories that make it possible: DX-IRIS2 Infra-red Interface Transmitter System To be Mounted on the chair, and are able to communicate with infrared-equipped television, radio or computer mouse.
Medema Production A/S Use the joystick to move the mouse on the computer screen. Use the “Select” button to make a mouse click. It works the same way as the mouse. You can make single clicks and double clicks, depending on what your PC is configured to use. Disable mouse again using the arrow up / down button. New feature can now be selected. User guide P9-0270-B 18 of 56 Version 2.0.
Medema Production A/S Safety check Daily safety check: The electronic system has an integrated safety check which runs up to 100 times per minute. To supplement this check, you should carry out the following regular checks.
Medema Production A/S Annual: The MC Concept 1170 II is designed to stay safe to use for at least 10 years, up to a maximum of 5,000 hours, providing it has service and safety inspections every year, which is equivalent to around 500 operating hours. The service must be carried out either by Medema Danmark A/S or an authorised workshop.
Medema Production A/S Driving the MC Concept 1170 II MC Concept is a modern device, specially developed to help you achieve maximum mobility. Before getting on or off the vehicle, you must check the following: That the wheelchair is switched off. That the wheelchair is not disengaged. That the wheelchair and the seat you are moving to are both stable. Avoid placing your full body weight on the footrests. This may tip the wheelchair forwards.
Medema Production A/S Changes of level Never attempt to climb onto raised objects or kerbs higher than 10 cm. Always approach changes of level head on, with the front and back wheels moving in a straight line. (See below.) This reduces the possibility of tipping. Fig 1 Fig 2 Fig 3 Fig 4 Driving on hills When driving on hills, you should try to keep the scooter moving all the time. If you have to stop, start up again slowly. When driving downhill, you must drive at the slowest speed.
Medema Production A/S 11 tips for driving the MC Concept: Reduce the speed when turning corners and going downhill. Reduce the speed when driving on inclines. Maximum incline: 6° = 10% Reduce the speed when driving on a sideways incline. Maximum sideways incline: 10° Avoid driving and parking in the rain Avoid parking on snow and ice. Always park on a level (flat) surface. Avoid driving on rough ground.
Medema Production A/S Driving on public roads: When driving on public roads, footpaths, pedestrian streets, car parks, shopping centres, etc. you must make sure you adjust your speed and distance for other users. At 7 km/h you must follow the traffic rules applicable to cyclists. This also means that your lights must be switched on during lighting-up time. (Optional extra) On footpaths, the maximum speed is 6 km/h. In this situation you are regarded as a pedestrian.
Medema Production A/S Brakes The MC Concept is equipped with two sets of brakes: The motor brake and the parking brake. Motor braking: When you drive downhill, the control unit of the MC Concept applies the motor brake. Parking brake: When the vehicle is stationary and the joystick is not moved, a magnetic brake is automatically applied to each drive unit. For driving, the magnetic brake is released first, after which the MC Concept can be driven as described above.
Medema Production A/S Fuses If the indicator light flashes to indicate overheating: Switch off the vehicle Wait for 3 minutes Restart On the right of the MC Concept behind the seat, there is a thermal fuse protecting the battery circuit. The fuse is white. If it pops out, you can push it back in again after a few minutes. If it immediately pops out again, contact your authorised dealer. There are no external fuses that need to be replaced. The thermal fuse is here.
Medema Production A/S Batteries The battery indicator shows how much power is available to the scooter. Red, amber and green indicate that the batteries are fully charged. Red and amber indicate that the batteries will soon need recharging. Red indicates that the batteries need to be recharged as soon as possible, otherwise the scooter will cut out. The MC Concept’s batteries should be charged while not in use. This extends the service life of the batteries.
Medema Production A/S Charging Charging 1 Plug the cable into the control box on the scooter. 2 Plug the charger into the outlet or switch it on. 3 Use the indicator lights on the charger to check that charging has started. 4 When charging has finished, switch off or unplug the charger, and then remove the charger cable from the control box. The actual battery indicator on the vehicle will show “full” after charging for a short time.
Medema Production A/S General care If you get food or drink, etc. on the control unit, you should wipe it with a damp cloth. You must only use a damp cloth to clean the MC Concept. Note! Using a high-pressure cleaner or hose may damage the scooter’s electronic system. Service intervals The MC Concept is designed to require a minimum of maintenance. However, you are recommended to take it to your dealer for an annual inspection.
Medema Production A/S Storage The scooter should be stored and charged under cover, preferably at temperatures above 10° C. Note! The charger must be kept dry, but should not be covered when in use. For long-term storage we recommend covering the MC Concept 1170 II to protect it from dust, rain and sunlight. Transporting by motor vehicle The MC Concept 1170 II must ALWAYS be secured while being transported. To lift the scooter, use the pivot wheels at the front and back.
Medema Production A/S Transporting by plane To transport the MC Concept by plane, the airlines require: the batteries to be aircraft approved the air to be let out of the tyres the battery leads to be disconnected (not always, but frequently). A main switch can be fitted (optional extra). A battery declaration for air travel can be found on the Mini Crosser website: http://www.minicrosser.dk/Download_brochurer.
Medema Production A/S Changing the wheels If you get a puncture in one of the pneumatic tyres or if a tyre is so badly worn that it needs to be replaced, follow the instructions below. Tyres and inner tubes can be purchased from the authorised dealer who supplied the MC Concept. The MC Concept must be TURNED OFF before you start. Jack up the MC Concept onto a block of wood so that the wheels are clear of the floor/surface. Anti-tilt wheel Undo and remove the middle nut.
Medema Production A/S Central wheel. You are recommended to contact your resource centre, etc. to obtain the correct tools. Use a screwdriver to prise off the cover plug. Remove the nut with a 17 attachment. (Use a new nut when reassembling). You may need to use a wheel puller, as the wheel may be very difficult to remove. Replace the wheel with a washer and a new nut. Apply Loctite 243 (blue) to the thread. Push the cover plug back on. User guide P9-0270-B 33 of 56 Version 2.0.
Medema Production A/S Changing the battery This is how to remove the batteries without using tools. Always switch off the power on the MC Concept before starting work. Raise the bellows. Remove the two plugs behind the seat. Undo and remove the two finger screws behind the seat. If the MC Concept has leg supports, these must also be removed along with their plugs. These are on the right and left of the seat. See the descriptions below.
Medema Production A/S Manual leg supports Press the trigger and lift of the leg supports. Electric leg supports Push the catch down. Then twist the leg support out to the side. You will now be able to lift it off. There are no external fuses that need to be removed. Electric central footplate Remove the plug under the seat on the right. Undo the screws on both sides and you will be able to remove the footplate. User guide P9-0270-B 35 of 56 Version 2.0.
Medema Production A/S You can now tilt the seat forward for access to the batteries. Remove the plus and minus terminals from both batteries. Loosen the strap around the batteries. The batteries can now be replaced. Take care not to trap any cables when fitting the new batteries. Keep hold of the seat while tilting it backwards. Battery strap User guide P9-0270-B Terminal 36 of 56 Version 2.0.
Medema Production A/S Changing lights In case one of the lights stop working: Check the power supply. Replace light module. 1 * For mounting on the other side: Mount bracket inverted. * REMEMBER! Red light should turn backward. * * * Pos Art. No. Description Qty 1 CR-5-0000 Blink and position lights, LED, complete 1 Note! Lights are extra. Lap belt Is there is a need for it you can, as an accessory, mount a lap belt or harness belt on MC Concept 1170 II.
Medema Production A/S Securing to vehicle floor with belts Dahl Engineering belt set for securing in motor vehicles. Item no. C2-0242 ALWAYS use four belts at the back and two at the front. The belts must always be attached to approved fittings in the vehicle and the four eyes welded to the MC Concept. The belts MUST be attached within the angles shown in the picture for optimum safety. 30˚ User guide P9-0270-B 45˚ 60˚ 38 of 56 40˚ Version 2.0.
Medema Production A/S Attachment point Attachment point 25˚ 10˚ Min. 150 mm on floor User guide P9-0270-B Centre line 39 of 56 Min. 150 mm on floor Version 2.0.
Medema Production A/S Footplate/footrest Manual central footplate To adjust the footplate to a comfortable angle for the legs, undo the screws shown here. You can now adjust the footplate. REMEMBER to tighten the screws properly again. To adjust the angle of the actual footplate, use the set screw under the footplate. To adjust the footplate up and down, undo the screws shown here. You can now adjust the footplate to the required height. REMEMBER to tighten the screws properly again.
Medema Production A/S You can adjust the footplate forwards and back. Undo the two screws indicated on both sides. REMEMBER to tighten again on both sides. Electric central footrest You can adjust the footplate forwards and back. Undo the two screws indicated on both sides. REMEMBER to tighten again on both sides. Centring the footplate: Undo the screws on both side - centre - then tighten again. To adjust the calf pads, undo these screws. Adjust and tighten.
Medema Production A/S Length adjustment: Switch to the seat functions setting by pressing the up/ down button. Toggle between the settings with the Select button. The icon for the left leg support starts flashing. Move the joystick up/down to change the length. To adjust the angle: Use Select button until the icon for the right leg support starts flashing. Move the joystick up/down to adjust the angle. Adjusting both parts at once: Move the joystick to the right until both leg support icons start flashing.
Medema Production A/S Manual footrests You can adjust the footrests forwards and back. This can be done by undoing the two screws indicated. REMEMBER to tighten the screws again. To adjust the footplates up and down, loosen the clip. To adjust the footrests up and down, loosen the clip. User guide P9-0270-B 43 of 56 Version 2.0.
Medema Production A/S You can move the footrests to the side. To do this, press your finger where indicated. This means no tools are needed. The calf rests can be continuously adjusted up and down. To do this, undo the screw, move the calf rest, then tighten the screw again. Electric footrests You can adjust the footrests forwards and back. This can be done by undoing the two screws indicated. REMEMBER to tighten the screws again. User guide P9-0270-B 44 of 56 Version 2.0.
Medema Production A/S Adjusting the height and angle using the joystick: Switch to the seat functions setting by pressing the up/ down button. Toggle between the settings with the Select button. The icon for the left leg support starts flashing, and you can adjust it by moving the joystick up and down. Use the Select button until the icon for the right leg support starts flashing. If both icons are flashing, you can adjust both leg supports at once. To adjust the calf pads, undo this screw.
Medema Production A/S You can adjust the height manually by undoing this screw, adjusting, then tightening again. You can adjust the angle of the footplates by undoing this screw, adjusting, then tightening again. Introduction to Ergo Lux Armrest angle You can use the adjusting screw to alter the angle of the armrest by about 15°. The arm can be folded right up to make it easier to get in and out. Adjusting screw. 3 2 1 Seat adjustment. 1. 2. 3. User guide P9-0270-B Height adjustment of armrest.
Medema Production A/S Adjusting the headrest 3 4 2 1 1. 2. 3. 4. Height adjustment Adjustment forward/back: Headrest angle Adjusting the headrest Swing-away fitting Release lever The MC Concept can be equipped with a swing-away fitting. To use it, push the release handle and you can move the joystick to the side. User guide P9-0270-B 47 of 56 Version 2.0.
Medema Production A/S Adjusting the Spinalus backrest Easy access to adjustments through four large zips. The adjustments are made just behind the zips. To set the shape of the backrest, undo the four screws. All bolts on the Spinalus can be undone and adjusted for the user. Fig. 1 Figs. 1 and 2 show the Spinalus backrest with maximum settings. Fig. 2 User guide P9-0270-B 48 of 56 Version 2.0.
Medema Production A/S Adjusting the ION seat Adjust the angle of the back by pulling here. Move the back to a new posistion. It has to click in place in both sides to be locked in place. The back rest is easily adjusted with these velcro ties. The back is easy to fold for transportation. A1a 16"W x 22”H A1b 17"W x 22”H A1c 18"W x 22”H A2 A3 The seat height is adjustable from 40-50 cm, by changing the mounting holes in the frame.
Medema Production A/S Reconditioning When preparing a MC Concept for a new user it is important to check the following. User guide P9-0270-B Transaxle - clean and check for leaks. Check bearings. Tyre pressure (see technical data). Condition of tyres (check for cracks and abnormal wear). Cables (check that the cable insulation is undamaged and that no cables are trapped, secure loose cables, check for signs of heat damage).
Medema Production A/S Accessories (check the accessories, manual and electronic. Replace any faulty finger screws or handles). Test drive (test all functions at their maximum settings. Test drive the scooter under maximum load). The user instructions must be provided in a plastic folder on the seat. If the panels have lost their shine: Wipe the panels dry with a damp cloth. Wax them with car wax. Further information: See the Service Instructions.
Medema Production A/S Technical data MC Concept 1170 II General information: Wheel sizes: Safety wheels: front Central wheels: middle Pivot wheels: back Ø200 mm / solid Ø420 mm / pneumatic Ø230 mm / solid Total length 117 cm Total width 67 cm Weight incl. seat (45 cm) 180 kg Weight without seat 156,5 kg Tyre pressure for central wheels 2,1 bar Max.
Medema Production A/S MC Concept 1170 II Lights: Indicators Extra equipment Lights Extra equipment Bulb, headlight 3W Bulb, rear light 5W Bulb, indicators 10 W (*) Driving distance is depending on: temperature, wind, terrain, tyre pressure and user weight. User guide P9-0270-B 53 of 56 Version 2.0.
Medema Production A/S Own notes User guide P9-0270-B 54 of 56 Version 2.0.
Medema Production A/S User guide P9-0270-B 55 of 56 Version 2.0.
medemagroup
