Instruction manual

137
Media Gateways
October 2002
The MCC1 Media Gateway
A MCC1 Media Gateway can be used as a Port Network (PN) cabinet. Doors on the front and
rear of the MCC1 Media Gateway protect the internal equipment and allow easy access to the
circuit packs. Each MCC1 Media Gateway contains casters. Leveling feet keep the cabinet from
rolling. Each corner of a MCC1 Media Gateway can bolt to the floor, if required.
Typical MCC1 Media Gateway Layout
Figure notes
Number Description
1 Carrier in position C
2 Carrier in position B
3 Carrier in position A
4Fan Unit
5 Carrier in position D
6 Carrier in position E
7 Power distribution unit
lcdfpdui KLC 031202
1
2
3
4
5
6
7