User`s manual

USER`S MANUAL FM-SPY-T

File: FM-SPY-T Manual E.DOC MEDIA ENGINEERING page 10/41

10. locate the two jumpers J1 and J0 according to the PCB layout drawing:

jumper J1 jumper J0

11. choose the new sampling rate and select the propre jumper setting:

fs J1 J0

96 kHz

48kHz

44.1 kHz 10

32kHz

J1 J0

The table indicates the jumper settings as follows:

- “

0” indicates that no jumper has to be set

- “1” indicates that a jumper has to be set

example

: in order to set a sampling rate of 48kHz (which is the factory

setting) do not set a jumper at the left position J1 but set a

jumper on the right position J0