User`s manual

USER`S MANUAL FM-SPY-T
File: FM-SPY-T Manual E.DOC MEDIA ENGINEERING page 13/41
B.1. BASIC OPERATIONS
B.1.1. STARTUP SEQUENCE
After proper installation of the FM-SPY-T (refer to A.2. INSTALLATION PROCEDURE on
page 8), flip the “OFF-POWER-ON” switch on the rear side to the “ON” rsp. upper position in
order to start up the device. Upon power on, FM-SPY-T enters the initialization sequence
and displays the firmware version information on its LCD display (screen 1).
screen 1
Simultaneously all keys on the keypad will light up briefly
1
. A few seconds later, FM-SPY-T
will enter the INITIAL state (refer to section B.1.3: INITIAL STATE on page 14)
B.1.2. LIT UP KEYS
FM-SPY-T has quite a large number of keys, but is nevertheless operated very simply. Only
the lit up keys react on user input. No matter in what position of the input sequence the
operator is, the FM-SPY-T will light up only those keys, which are meaningful for the next
keystroke.
1 2 3 LOAD
DISP
4
↑PGM
5
↑25kc
6
LO/RE
0
SCAN
7
↓PGM
8
↓25kc
9
ANTA/B
SAVE
MENU
keypad 1: INITIAL STATE
“keypad 1” shows an example: The keyboard is ready for user input on keys 1,8,9,LOAD or
SAVE. All other keys are disabled and have no function. Thus, FM-SPY-T will guide you
through the required steps to set up the tuner as desired.
1
This serves as a test for the LED illuminated push-buttons.
B. OPERATING INSTRUCTIONS
FM-SPY-T R1.2
Media En
g
ineerin
g