User`s manual

USER`S MANUAL FM-SPY-T
File: FM-SPY-T Manual E.DOC MEDIA ENGINEERING page 23/41
B.2.4. SELECTING LOCAL rsp. REMOTE OPERATION
In case the FM-SPY-T is hooked up to a PC via the USB interface some tuner settings (e.g.
tuning to a specific RF receiving frequency) can be established from “remote” using the FM-
SPY PC application program. This might result in a conflict with settings made “locally” on
the keypad.
In order to prevent such conflicts MEDIA ENGINEERING has decided that the operator able
to operate the hardware device FM-SPY-T is the so called master. He has to make the
decision if the command mode “local” or “remote” has to be chosen and selected via the
MENU state (refer to section B.2.1. MENU FUNCTIONS on page 20) and the LO/RE button
(see “keypad 11”).
1 2 3 LOAD
DISP
4
↑PGM
5
↑25kc
6
LO/RE
0
SCAN
7
↓PGM
8
↓25kc
9
ANTA/B
SAVE
MENU
keypad 11
The entire sequence to put the FM-SPY-T into the “remote” mode is: MENU-MENU-LO/RE.
As soon as the LO/RE button is activated, the following screen will appear:
screen 7
REMote is active!