User`s manual

USER`S MANUAL FM-SPY-T
File: FM-SPY-T Manual E.DOC MEDIA ENGINEERING page 27/41
B.2.6. SELECTING THE ANTENNA INPUT
To change the antenna input in use, enter the MENU state (refer to B.2.1.: MENU
FUNCTIONS on page 20) and press button ANTA/B on the keypad.
1 2 3 LOAD
DISP
4
↑PGM
5
↑25kc
6
LO/RE
0
SCAN
7
↓PGM
8
↓25kc
9
ANTA/B
SAVE
MENU
keypad 8: MENU
After pressing this key, FM-SPY-T will toggle the antenna input from A→B or from B→A,
depending on the previous selection of the antenna input.
Note: FM-SPY-T is featuring two antenna inputs for there are situations in which it’s
necessary to monitor not only radio stations that can be received with the help of an
aerial (e.g. an antenna on the roof) but also the ones coming in via CATV (CAble TV
network).
The feature is also helpful when a directional antenna is used in order to receive a
certain station with a nondistorted or strong enough RF signal. In this case an omni-
directional antenna (probably a ground plane connected to the second antenna input)
might be used to receive the other stations of the FM band.
* * *
ANT A/B