User`s manual

USER`S MANUAL FM-SPY-T
File: FM-SPY-T Manual E.DOC MEDIA ENGINEERING page 32/41
C.4.1. DESCRIPTION OF THE MAIN MENU POINTS
name description
Protocol This area allows the inputting of administrative data. It consists of three parts.
In the part “Operator” it's possible to key in the name of the operator and/or the name of the
organisation.
In the part “Antennae” it's possible to key in detailed informations and settings regarding the
antennae in use.
In the part “Results” it’s possible to specify the directory for the storing of the measured data.
It's optional to input some comments as well.
Parameter In this section it's possible to define the main hardware settings like e.g. the receiving
frequency of the tuner and the antenna input in use for the coming up measurement.
In the same section one can outperform a so called panorama scan over a specified or the
entire FM band in one of three step sizes. A panorama scan is useful in case the radio stations
frequencies are unknown or an overview over the FM band is useful.
Measurement This area is containing the actual measuring tasks. Please refer to the appropriate detailed
descriptions in chapter C.4.1. beginning on page 33.