User`s manual

USER`S MANUAL FM-SPY-T
File: FM-SPY-T Manual E.DOC MEDIA ENGINEERING page 37/41
C.5. HOW TO MAKE MEASUREMENTS
1. Connect a suitable antenna to the FM-SPY (rsp. FM-SPY-T) and power up the device.
Make shure the FM-SPY (-T) is having an USB connection the the computer.
2. Put the FM-SPY-T in the "remote operation mode" by pressing SAVE -> SAVE -> LO/RE
3. Start the FM-SPY application.
4. Start the data transfer process by clicking onto this symbol in the tool bar:
5. In case no error message is appearing the hardware is ready for measurings.
6. In case an error message is appearing it's useful to check if the FM-SPY is listed in the
hardware device manager (section USB-controller). Otherwise the USB connection to the
FM-SPY has to be checked.
7. Change to the section PROTOCOL and input the necessary data. The inputs are read
automatically as soon as the cursor leaves the field.
8. Change to the section PARAMETER and make the necessary adjustements and/or
outperform a panorama scan.
9. Change to the section ALARMS and define the propre alarms.
10. The main measuring task can now be started: click onto the PLAY symbol (triangle) in the
tool bar.
11. As long as the measuring is running (active) it's possible to switch from tab to tab in order
to follow up and/or read out the development of the results.
12. All resuts are written into the logging file continuously.
* * *