User`s manual

USER`S MANUAL FM-SPY-T
File: FM-SPY-T Manual E.DOC MEDIA ENGINEERING page 6/41
A.1. SAFETY CONDITIONS
After removing any housing parts and electronic assemblies it’s
possible to get access to live parts. It‘s essential to ensure that the
subsequent safety rules are strictly observed:
Servicing of electronic equipment must be performed by qualified
personnel only.
Before removing covers the equipment has to be switched off and the
mains cable unplugged.
When the equipment is open power supply capacitors have to be
discharged with the help of a suitable resistor.
When the equipment is open components, that carry havy electrical
loads, such as power transistors and resistors as well as solenoid
coils should not be touched before a cooling off interval, as a
precaution to avoid burns.
During servicing unprotected and operating equipment never touch
bare wires or circuitry.
During servicing unprotected and operating equipment use insulated
tools only.
During servicing unprotected and operating equipment never touch
metal semiconductor cases because they may carry high voltages.
For removing and installing electronic components, please follow the
recommandations concerning the handling of MOS components.
A. INSTALLATION INSTRUCTIONS