DVB-T NAVIGATOR DUO Watch Digital TV programs on Your PC MT4168 User Manual
EN Index Index ������������������������������������������������������������������������������������������������2 Introduction ����������������������������������������������������������������������������������2 Package content ��������������������������������������������������������������������������2 System Requirements ����������������������������������������������������������������2 Device installation �����������������������������������������������������������������������3 Software installation ���������
Device installation Put software disc into CD-ROM drive, autorun function will pop-up window as shown below: window appear select installation language and click “OK”. When following window will appear click “Next” Select and click “Driver Installation”, when following window appear click “Next”. When driver is sucessfully installed click „Finish”. Now you can plug DVB-T stick into USB port of your PC computer. Windows will recognize new hardware and install it automatically.
EN When following window will appear click “Yes” “sn.txt” in the root folder of software disc - use windows notepad to read it. Now select destination folder or simply accept suggested path and click “Next”. When following window will appear enter user name and software license key and click “Next”. Installation in progress... Note! License key is on CD envelope or in the file 4 When software is sucessfully installed click „Finish”.
Using the device Click “Start” to run scanning process. EN Plug antenna into DVB-T stick. It is recommended to expose antenna outside or use external TV antenna. Next plug DVB-T stick into USB port. Now start application, double click “TotalMedia” icon on windows desktop. Following screen will be shown: Scanning in progress... Select and click “TV”. Click “Yes” to scan for channels.
EN When scanning is finished a message box will appear (found channels depend on TV signal strength and country). Click “OK”. Click “Yes “ to confirm. Now you can watch TV. Following screen will appear: Now click “Save” to save channel list.
Main TV window 1 EN 2 6 7 8 3 9 10 11 12 13 14 15 16 4 5 1. 2. 3. 4. Back to main menu window Back to previous window Hide application to task bar Switch between window/full screen mode 5. Close application 6. Timeshift/pause button 7. Stop button 8. Record button 9. FastRewind/FastForward button 10. Previous/Next button 11. Volume control 12. Channel Up/Down button 13. Enable/disable favorite channels 14. Aspect ratio: choose between 4:3, 16:9 or auto 15.
EN Remote control 1. 4. 5. Using EPG (Electronic Program Guide) Click “EPG” button on Main TV window, following screen will appear: 6. 2. 3. Click < > buttons to navigate between days, use ∧∨ buttons to scroll up/down channel list. Click on selected item to show detailed info. Following screen will appear: 1. MUTE: enable/disable mute function. 2. VOL: volume control. 3. CH: channel up/down control. 4. ZOOM: enable/disable full screen mode. 5. POWER: start/close application. 6.
You can click “Record” to add this program to schedule recording list. To exit click “Cancel” button or “Back” button. Scheduled program is marked with red dot as shown below: Favorites channels Click “Channels” button on Main TV window, following screen will appear: Click on selected item and then click “Add to Favorites”, press again to deselect. When finished click “OK” to save changes. Recorded TV Click “Recorded TV” button on Main TV window to access previously recorded programs.
EN Click on item to select it. Click “Burn to Disc” button to save selected item on CD/DVD disc. Double click on selected item to watch it in full screen mode. Schedule recording Click “Schedule” button on Main TV window to access schedule recording feature. To modify existing entry select item and click “Modify” button. To enter new recording task click “Add” button.
Teletext EN Click “Teletext” button on Main TV window to access teletext feature. Use ∧∨ scroll buttons to navigate or enter page number using remote control numeric keypad. Click “Yes” to stop recording and switch to another channel, otherwise click “No”. Settings tab Click “Settings” button on Main TV window to enter settings menu. A warning message box will appear stating that changing some of settings may effect on scheduled or recorded programs in progress. Click “Yes” to continue.
EN Select your country from list and click “Next”. Select item, click “A” icon to rename channel, click “trashcan” to delete channel, click ∧∨ to reposition channel on the list. When finished click “Save”. Dual View Click this icon to enable PIP function. Next you can start new scanning for channels, click “Start”. Editing channel list Click “Edit Channels” on TV Setting window, following screen will appear: 12 *Specification and appearance of device are subject to change without prior notice.