User manual

WIRELESS OPTICAL
MOUSE 2.4G
Instructions Manual
Hi-Res Wireless Optical Mouse
MT1073
EN
Package contents
■ Wireless Optical Mouse
■ USB receiver
■ 2 AAA alkaline batteries
■ User manual
System requirements
■ Windows ME, 2000, XP or Vista
■ Free USB Port
Installation
Description of keys and DPI adjusting
Installing the battery
1. Remove the battery cover.
2. Insert two AAA batteries into the battery com-
partment, make sure to properly orient the
positive (+) and negative (-) ends as speci ed
by the marks in the battery compartment. Re-
place the battery cover.
3. Switch on the mouse, the LED in bottom of
mouse will blink.
Installing the receiver
1. Insert receiver into USB port of PC, the com-
puter system will automatically detect it and
prepare it for full operation.
2. The mouse may use then. If the user wrongly
operates, please redo the above operating
procedures.
Using “DPI-adjusting key”
Using “DPI-adjusting key”, the resolution of
mouse can be switched between 800DPI and
1600DPI in turn. That LED light in “DPI-adjust-
ing key” blinks slowly indicates 800DPI and fast
1600DPI.
Backward and Frontward keys
Backward and Frontward keys for your easily
navigating forward and backward on the Inter-
net.
Low-voltage alarming function
When batteries have been used for some time
and discover the LED light in“DPI-adjusting key”
blinks automatically, which reminds you that
batteries voltage is becoming low, suggested
you replace the batteries with new ones.
Scrolling
wheel
DPI-adjusting
key
Right keyLeft key
Forward
Backward
ON/OFF switch
Battery cover
Position for storing
receiver
Diagram 1
Diagram 2