SLIDE SCANNER MOBILE FILM & SLIDE SCANNER MT4092 User Manual
EN Index Welcome .........................................................................................2 Precaution ......................................................................................2 Preparation ....................................................................................3 Standard Accessories .................................................................3 Part Names ................................................................................
ized service center for repairing. Never attempt to repair Digital Image Copier on your own. ¯ Use only the recommended power accessories. Use of power sources not expressly recommended for Digital Image Copier may lead to overheating, distortion of the equipment, fire, electrical shock or other hazards. ¯ Digital Image Copier may become slightly warm during use. This does not indicate malfunction. ¯ If the exterior of Digital Image Copier needs cleaning, wipe it with a soft, dry cloth.
EN Brush 135 Slide holder Installing the Battery Pack 1. Open the battery compartment cover by lightly pressing and sliding it back as shown. 2. Insert the supplied battery. Make sure the battery label is facing upwards and the (+ and -) ends of the battery match to the polarities indicated in the battery compartment. 3. Snap the cover back into place.
1. Insert the battery pack into the battery compartment 2. You may charge the battery in 2 ways: (a) Plug the USB mini B of the supplied USB cable to the USB port of the copier, and plug the other USB end into the USB port of your computer/notebook. Please charge the battery at least 5.5~6 hours prior to your first use. 3. Red LED will light on during charging. When the battery pack is fully charged, the red LED light will be off and you may disconnect the charging connections.
EN Using the Digital Image Copier 1. Insert SD card into the SD card slot first. 3. Insert the loaded film/ slide holder properly into the slot according to the ፖ or Þ sign shown on the Image Copier and film holder. (Insert through front entrance) 2. Press Power button to power on. Press Power button to power off if you do not want to use the Image Copier.
You can adjust the location of the film by moving the film holder; the film holder can be moved in both directions. Keep your picture in the rectangular white frame, improper adjustment of picture may copy the black edges of the film holder. If the black edge of a slide film is on top or bottom of the LCD display, tilt the copier forward or backward will eliminate the black edge. You may crop away the black edges later by the software. 4. To select film type on the screen.
EN Note: For power saving the copier will automatically turns to sleep condition if you are not using it for more than 3 minutes. You may wake up the copier by pressing any one of the button. If the copier is not using for more than 6 minutes it will turn off automatically. 6. Moving the film holder for next. to reverse image to 180 de7. Press Flip button grees. In case the slide is accidentally loaded into the film holder in an upside down direction. 8 Playback Mode 1.
Delete Mode 1. Under Playback Mode Press Delete button once to delete current image. 2. Press Delete button twice to delete all images. 3. Press Delete button three times to format SD card. Note: Formatting SD card will delete all the files in the card. Download your files in the SD card into your computer before the SD card is formatted. 2. Turn power on. 3. Press the Up button to select “SD to PC” to YES, then press the OK button for confirmation. EN 4.
EN Note: Bundled MediaImpression is only for images editing purpose. The Acquire function is for Film Scanner/ Photo Scanner without TFT display. Viewing Images from TV 1. Set TV to video mode, and plug the TV cable to copier and TV set properly. Turn power on. 10 2. Press Playback button for viewing image on TV. 3. Press UP button to forward reviewing. Press DOWN button to backward reviewing.
4. Press Playback button once more for slide show on the TV screen. The slide show can be stopped by pressing the Up or Down button. The slide show can be continued by pressing the Playback button again. 5. Press the Playback button once more during the slide show will terminate the TV mode and the film scanner will return to the original stage. 6. Press Power button to turn off when no further TV viewing.
EN make the photo warmer. Add blue or green to make the photo cooler. 2. Drag the Lighter/Darker slider to the left to reveal details hidden in a dark photo or to the right to make a faded photo look new again. 3. Click “Apply” if you like the result. Clock “Cancel” if you do not. 1.3 Red-Eye This feature makes it easy for you to fix a red-eye – a common problem in flash photography. There are two ways to fix red-eye: Auto Fix 1.
1.6 Blur Background This feature can be used in subtle way – to tone down un-important background details, or for dramatic effect- by making the main subject of a photo “pop out” of the picture. How to use the Blur Background function: 1. With your cursor, trace a line around the person or object you want to strand out. When you release the mouse button, the area outside the traced line will become slightly blurred. 2.
EN 2.3 Lighten/Darken The Light/Darken tool is good for adjusting specific areas of a photo. 2.4 Smudge Simulate the smearing of wet paint. Please click and drag the sliders below to change the brush size and sharpness. 2.5 Sharpen Sharpen blurry areas. Click and drag the sliders below to change the brush size and transparency. 2.6 Blur Smooth out rough areas. Click and drag the sliders below to change the brush size and intensity. 2.
Appendix Icons & Indicators Specifications Image Sensor 1/2.5” inch 5 mega CMOS sensor, 5.17Mega pixels Preview and review 2.4” color LCD display Lens Specification F=6.4, f=12.
EN PC System Requirements ¯ Pentium® P4 1.2G processor ¯ Free USB2.0 port ¯ 512MB RAM ¯ 500MB free hard disk space ¯ 1024 x 768 pixel color monitor ¯ CD-ROM drive ¯ Windows XP SP2/Vista/Win7 32&64bit Mac System Requirements ¯ PowerPC G5 or Intel Core Duo ¯ Free USB2.0 port ¯ 768MB RAM ¯ 500MB free hard disk space ¯ 1024 x 768 color monitor ¯ CD-ROM drive ¯ Mac OS 10.
