User`s guide

Chapter 3 Menus and Settings
Country: Select the country you are in to have the television reception
properly formatted.
Minimum Frequency/Minimum Channel, Maximum
Frequency/Maximum Channel: For Digital TV only, these settings can be
changed to restrict the range that Scan will use to search for available
channels.
Signal: For Analog TV only, choose the source of the television signals.
Scan/Auto Scan: Click to look for all available channels and list them.
Export, Import: You can use these two functions to export or import a
channel list so that you don’t need to scan again when using other
computers.
Delete: For Digital TV only; you can remove a channel from the list by
clicking this button.
Add or Update Channels: For Digital TV only. Select the frequency range
you want and then click Scan. This feature saves time by allowing you to
rescan for channels to add or update without having to run through the
whole frequency spectrum.
Smart Scanning: For Digital TV - DVB-T and DMB-T only, enabling this
option can widen the scanning range to get improved results. However, it’ll
take longer to finish the scanning process. If the first scan was not
satisfactory, select this option and scan again.
Type: For Digital TV-ATSC only; select the signal from Cable or Antenna.
Channel Information/Edit Channel: You can edit the name for each
channel. Type a name that may help you be clearer about what kind of
show it is.
Select the red heart next to a channel to make it a favorite.
Clear the heart to remove it from the favorites list. Favorite
channels will be shown when you click the button on the
channel list.
29