User`s guide

Chapter 4 Appendix

Presto! PVR does not respond after being started, or it
displays stuttering or corrupted video.
If you encounter one of these problems and are using Windows XP
Service Pack 2, please visit the Microsoft website at this link,
http://www.microsoft.com/downloads/details.aspx?displaylang=en&
FamilyID=14caaf6d-198c-4197-82ad-28251f9c50a5, and download
the latest patch.

I can watch and record TV programs, but cannot play
them back or preview the channels.
Make sure that DirectX 9.0 or later has been installed on the
computer. Microsoft DirectX 9.0 improves graphics, video, 3-D
animation, audio, security, and performance in the operating system.
Go to the Start menu, click Run, and type dxdiag. You will find a list
that shows the DirectX version. If the installed DirectX version is
older than 9.0, download and install the latest DirectX version from
the Microsoft website at
http://www.microsoft.com/windows/directx/default.aspx
. It's free.
To find out which version of DirectX you are using, click Run from the
Windows Start menu, type "dxdiag", and then OK. The DirectX
diagnostic tool will open, and the version number will be listed under
System Information.

I can’t record Digital TV programs onto DVD.
High-definition Digital TV (DVB-T/DMB-T/ATSC) can’t be recorded
onto DVD.

I can't change the recording settings.
The file type and quality settings are designed for analog TV. These
settings will be disabled and set to 'DVD' and 'Good' when watching
the DVB-T/DMB-T/ATSC TV. The settings, on the Record tab of the
Settings dialog box, will be enabled for analog TV.

Is the TV tuner device properly installed?
43