Introduction: Thank you for purchasing this Medialink Wireless USB Adapter! Please follow the simple steps in this Quick Installation Guide to get your computer quickly connected to your wireless network. For detailed operating instructions, please refer to the User Manual on the installation CD.
Install Driver Important Note: If you have Kaspersky Anti-Virus and/or Zone Alarm you must follow these steps before installing this adapter: Kaspersky: • Double Click the "K" icon to open the Kaspersky Control Panel • Select "Settings" at the top • Select "Options" to the left • Uncheck the box next to "Enable Self-Defense" • Save and Close • Then proceed to Step 2 of this installation Zone Alarm: • Completely Uninstall Zone Alarm • (Uninstall the Medialink Adapter if have already attempted to install it)
Insert Installation CD into an available CD-ROM drive. The welcome screen will appear. If this screen does not appear, go to your Start Menu, then My Computer and then double-click “Medialink”. STEP 1. If you do not have a CD Rom drive, the software can be downloaded at www.medialinkproducts.com/support NOTE: The following screen shots illustrating the installation procedure may vary slightly depending on the operating system. STEP 2.
Select “I accept the terms of the license agreement” and click “Next”. STEP 3. “Install driver only” will be selected. Click “Next” STEP 4.
Click “Install” to begin the driver installation. This may take several minutes. STEP 5. Click “Finish” to complete the installation and restart your computer. STEP 6.
Insert Your Wireless USB Adapter Directly Into a USB Port. STEP 7. (Note: This Medialink Wireless USB Adapter is only compatible with computers and will not work when plugged into a TV, Bluray Player, Printer or any device that does not run a compatible Operating System.
Connect to your Wireless Network using Windows Windows 7 – Double-click tray icon to view available networks. STEP 1. at the bottom of the screen XP / Vista – From the Start menu, click “Connect To” and then “Wireless Network Connection” to view available networks. STEP 2. Select your network from the list and click Connect. STEP 3. If your router has security enabled, please insert your case-sensitive network key (aka Wireless Password, WEP Key or WPA Key). STEP 4.
Thank you for purchasing this Medialink product! Please refer to the User Manual on the CD for more details and other settings Medialink Products, LLC 1951 Old Cuthbert Rd., Ste 301 Cherry Hill, NJ 08034-1411 Technical Support Hotline: 856-216-8222 Technical Support E-Mail: support@medialinkproducts.