Owner`s manual

DVR Quick Guide
46
• Someone in your household may have placed the TiVo DVR in Standby mode. To return to
normal mode from Standby, press either the TiVo button or the LIVE TV button on your
TiVo remote control.
My audio system is set up to play in stereo, but it is only playing mono.
• Make sure that Default Audio Program (stereo) is selected on the Audio settings screen, and
be sure you connected audio using the TiVo DVR’s L/R Audio Out jacks.
I can’t select an alternate audio track.
• Recorded shows, such as those in the My Shows list, always have only one audio track, the
one they were recorded with.
• You cannot change the audio track if you are watching a live show, but are not caught up to
live TV. Catch up to live TV by pressing the ADVANCE button. Changing the audio
program will clear the saved part of the show you are watching, so you will only be able to
rewind live TV to the point where you changed the audio program.
My shows are playing in the wrong language.
• You may have selected the wrong language in the Default Audio Language setting. To
modify this setting, select ‘Settings & Messages,’ then ‘Settings,’ then ‘Audio,’ then
‘Alternate Audio.’
I see a gray screen with a message that says “Searching for signal.”
Your TiVo DVR is having trouble tuning to the channel you are on. Follow these steps to
restore the video: