Hardware manual
Table Of Contents
- Cover Page
- Contents
- About this guide
- Safety Instructions and safety warnings
- Before you start
- Introduction to NION
- Setting up the NION
- Introduction
- Configuration
- Updating the firmware
- Using the front panel
- Using the web interface
- Using XDAB clusters with VLANs and CobraNet
- Introduction
- Important concepts
- Use cases
- Scenario 1 - Basic network
- Scenario 2 - Network using VLAN
- Scenario 3 - Network with VLAN and analog interconnects
- Scenario 4 - Network with VLAN and digital interconnects
- Scenario 5 - Network with an XDAB cluster
- Scenario 6 - Network with VLAN and XDAB
- Scenario 7 - Network with VLAN and XDAB
- Scenario 8 - Network with VLAN and two XDAB clusters
- Scenario 9 - Network with VLAN and three XDAB clusters
- Setting conductor and XDAB priority in NWare
- Further examples
- Troubleshooting
- Connector ports
- Technical specifications
- Reference Information
- Warranty statement
NION Hardware Manual
May 17, 2011 Version 1.6.2a.0 3
So
me text t o force a page b reak in Word but remain inv isible
Manual set
This guide is part of the MediaMatrix documentation set. The table below shows which user
guides to refer to when you want to find out how to accomplish various tasks.
Note: Several associated products are required to complete a working MediaMatrix system.
Both Peavey products and third party products must be installed correctly for the system to
operate in accordance with published specifications.
Tasks Relevant Guides
Building up an audio system using devices available
from the NWare device tree.
You may be unfamiliar with some aspects of NWare or
new to NWare altogether. You want to read about the
features of NWare and want step-by-step instructions,
not just reference information.
NWare User Guide
Building up an audio system using devices available
from the NWare device tree.
You are familiar with Nware devices and when to use
them. You want to look up settings to see what they are
for.
NWare Device Reference
Finding out about new features added to releases of
NWare and NION software.
NWare Release Notes
Using different protocols, such as PASHA and SNMP, to
remotely control and monitor devices in an NWare
project.
External Control User Guide
Understanding how Pandad works and managing it on
your network.
Pandad Administrator Guide
Physical installation and initial configuration of a NION
digital audio processor.
NION Hardware Manual
Physical installation and initial configuration of a CAB
4n.
CAB 4n Hardware Manual
Physical installation of an nControl unit and
configuration of associated software.
nControl Hardware Manual
Physical installation of an nTouch 180 and configuration
of associated software.
nTouch 180 Hardware Manual
Physical installation of an nTouch 60 and configuration
of associated software.
nTouch 60 Hardware Manual