Manual

Brief Notes
STEP
1
Version 1.0
Quick Installation Guide
Reminders
STEP
2
• Follow all instructions.
• Do not place this device near water.
• Clean only with dry cloth.
• Install in accordance with the manufacturer’s instructions.
• Do not place near any heat sources such as radiators, heat registers,
stoves, or the devices (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from
the devices.
• Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon them or against them.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this during lightning storms or when unused for long
periods of time.
• Refer all servicing to qualified service personnel. Servicing is required
when the devices has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen
into the devices, the devices has been exposed to rain or moisture,
does not operate normally, or has been dropped.
• Carefully read and follow the Quick Install Guide and User Manual.
• Do not drop or shake the device.
• Do not move the device when it is powered on.
• Do not overload wall outlets.
Operation Environment
Temperature 0 ~ 40 °C Humidity 5~95 ％ RH
1.
References
Under Windows Vista / 7, users can enable GPT when initializing
HDD with capacity higher than 2TB.
Operation System
Windows XP / Windows Vista(32bit/64bit) / Windows 7(32bit/64bit)
(under MBR partition, supports single capacity up to 2TB only)
Windows XP (64bit) / Windows Vista (32bit/64bit) / Windows 7(32bit/64bit)
(with GPT partition enabled, supports single capacity higher than 2TB)
Macintosh 10.7 or later
WARNING: Please must turn off power before insert or eject HDD from
Docking station. Any movement on HDD during power on status can seriously
damage your HDD and all data on it.
WARNING: HDD will be hot after running.
Please be careful when you touch it.
LED Indication / Button
Descriptions
3.
HDD Status : Blue : Power on
Purple : HDD Accessing
4.
HDD Power button : Press to power ON/OFF the HDD slot.
1.
It needs to be pressed and held for 3 seconds
to power off.
This design prevents accidental power off.
System Power button
2.
Power indicator : Blue : Power on
Orange : HDD Accessing
Rear Panel
eSATA port
USB 3.0 / USB 2.0 port
DC Input port
1.
2.
1.
3.
Overview
STEP
2
3
4
Descriptions
1 2 3
USB 3.0 Super Speed e-SATA
1
2
3
4
4
3
4
3
Please visit our website for manual
http://www.mediasonic.ca
http://forum.mediasonic.ca/
Online forum