User Manual

Single mode don't display
HDD error light
SET 1 RAID button Select SET 1 RAID mode.
2
SET 2 RAID button Select SET 2 RAID mode.
3
Power button
1
On
Off
Press the button
Press the button and hold it still
SD slot
Support SDXC UHS-II
6
Micro SD slot Support Micro SDXC UHS-II
5
7
USB 3.0 type A port
Smart Fan Status
Blue
Off
The fan is adjust the wind speed according to the temperature.
The fan is running at low speed.
9
8
Power light
Blue
Orange
Off
Power on
When the PC is off, the device goes to sleep mode.
Power off
14
HDD 1 ~ HDD 4 Status
Blue
Purple flash
Purple breathing LED
Active
Active
Is under rebuilding (in RAID 1)
SET 1 HDD error light
When RAID information, the device is not HDD inserted,
format error or reconstruction, red light is always on.
12
SET 2 HDD error light
When RAID information, the device is not HDD inserted,
format error or reconstruction, red light is always on.
13
Hatch door
15
DESCRIPTION
Red
Red Flash
Is under rebuilding (in RAID 1)
When the devies is no hard disk
and format error, LED will flash
16
HDD 1~HDD 4 Error / Rebuilding light
Smart Fan button
4
On/off setup
SET 1 RAID mode light
Orange Active
10
Single (Simulation of single mode)
JBOD Spanning ( Spanning Mode/BIG )
RAID 0 (Striping Mode)
RAID 1 (Mirroring)
Green Active
SET 2 RAID mode light
Single
(Simulation of single mode)
JBOD Spanning ( Spanning Mode/BIG )
RAID 0 (Striping Mode)
RAID 1 (Mirroring)
11
16
•This device is built in 2 sets of RAID.
•This design will prevent accidental
execution of this function.
Micro SD slot
Gold contacts facing up
Default setting is at
Single & Automatic
mode
03