Manual

Microsoft Windows Installation
Disk Initialization
Single mode (Non-RAID) - 2 New Simple Volumes
New simple volume / Partition
Single Mode - New simple volume
Start Search input diskmgmt.msc at “Start Search”
Microsoft Windows Installation
Microsoft Windows
•Before connecting to the PC, please refer to the Hard Drive Assembly
Procedures for RAID set-up.
•If HDD is pre-installed by our vendor; users can connect directly to PC
and start using the unit.
•If users wish to change the setting, please refer to the Hard Drive Assembly
for correct way of setting.
• Turn on PC and start Windows system.
• Connect the device with USB(or e-SATA) cable and the power adapter.
• Windows will search and install drive in “Disk Management”.
11 12
Note:
For 2TB Hard drive, users must format in GPT Partitions and use
Windows Vista or Windows 7 in 64bit.