Computer Hardware User Manual

HD Decoder Card Installation Guide
6 Rev. 0.0
Chapter 3: Installing the HD Decoder Card
Note 1: Observe precautions for handling static sensitive electronic components during
installation of the HD Decoder Card.
Note 2: Dedicate three adjacent PCI slots to the installation of the Decoder Card(s). This
will ensure proper ventilation, and accommodate the required daughter cards (when
using the MS9200).
To install the MS9100 HD Decoder Card:
1. Remove the computer cover to gain access to the PCI card slots
2. Remove the PCI slot cover in the card position. Put aside the screw for future use
3. Carefully install the HD Card in the chosen PCI slot.
4. Connect the 26-pin ribbon cable to CN6 on the MS9100 and the PC video card. Make sure that pin 1 is
oriented correctly.
5. Secure the card with the screw removed from the PCI slot
6. Replace the computer cover
7. Replace the AC power cable and turn on the computer
TO HD CARD, CN10
CN6, PIN 1
Figure 1. MS9100 Decoder Card (Analog)