Computer Hardware User Manual

HD Decoder Card Installation Guide
7 Rev. 0.0
To install the MS9200 HD Decoder Card (Rev. C)
1. Remove the computer cover to gain access to the PCI card slots
2. Remove the PCI slot covers in the card position(s). Put aside the screws for future use
3. Connect the Digital Card daughter card A to the main HD Card with the two (2) ribbon cables provided
4. Orient connectors CN6 and CN7 as shown in Figure 2, (red stripe marks pin 1)
5. Carefully install the HD Card, (and Daughter Card if needed) in the chosen PCI slots
6. Connect the 26-pin ribbon cable to CN22 on the MS9200 and the PC video card. Make sure that pin 1 is
oriented correctly
7. Secure the card(s) with the screws removed from the PCI slots
8. Replace the computer cover
9. Replace the AC power cable and turn on the computer
CN6, PIN 1
(RED STRIPE )
*
CN16,
PIN 1
MS9200 Rev.C
HD CARD
MS9200
DAUGHTER CARD - A
CN15,
PIN 1
CN22,
PIN 1
CN7, PIN 1
(RED STRIPE )
*
* RED STRIPE ON EACH RIBBON CABLE WILL BE OPPOSITE THE OTHER
RIBBON CABLES
Figure 2. MS9200 Rev.C Digital Decoder Card and Daughter Card A connections