U-DRIVE LITE Car DVR Device MT4037 User Manual
EN Index Parts of the car camcorder Index ................................................................................................2 Parts of the car camcorder .......................................................2 Preparing for using .....................................................................3 Inserting the Memory Card .....................................................3 Using this car camcorder ..........................................................
RED. The charge indicator light turns OFF when charging is completed. 3. Disconnect the car camcorder. Inserting the Memory Card 11. Mount 12. Mount 13. Speaker 14. Reset hole 15. Power/Charge/Busy LED 16. Microphone Preparing for using Bulit-in Lithium Battery Battery-charging through connection of car camcorder to PC by USB-cable. Please charge the battery when the indicator shows the icon. 1. Power OFF; connect the car camcorder to the PC by the USB-cable. 2.
EN Doing so will cerate the risk of damaging to the car camcorder and the card. ¯ Never remove the SD card from the car camcorder while the car camcorder is powered on. Doing so can cause failure to the picture recording operation, and even damage the memory card. Format the memory card All data will be deleted including protected files. Be sure to download important files to your computer before formatting. 1.
memory is full the car camcorder will stop recording automatically. Taking still images 1. Turn the car camcorder on and set it to capture mode. 2. Press the UP/ZOOM IN or DOWN/OUT to increase and decrease the size of your subject. 3. Hold the car camcorder steady and then press the SHUTTER button completely down to take a picture. Note: ¯ Make sure that your fingers do not cover the lens.
EN Capture menu list Menu item Function White Balance Adjust the white balance to suit different light sources. There five items for option: [Auto] / [Daylight] / [Cloudy] / [Fluorescent] / [Tungsten]. Menu item Function Resolution There are five options for choice: 5M: [2592X1944] / 3M: [2048X1536] / 2M: [1600X1200] / 1.3M: [1280X960] / VGA: [640X480] Move Detection This function can be used to detect the car camcorder for moving. There two items for option: [On] / [Off ].
2. 3. 4. 5. Press the MENU button again to select [Setup]. Use the UP or DOWN button to select an item. Press the OK button to enter the submenu. Use the UP or DOWN button to select the desired item. 6. Press the OK button to confirm the setting. 7. Press the MENU button to close the menu. Menu item Function Format All data will be deleted including protected files. Auto Off To save power, the car camcorder is turned off automatically after a period of time. There are two options: [On] / [Off ].
EN 2. Press the UP or DOWN button to select an item. 3. Press the OK button to enter the submenu. 4. Press the UP or DOWN button to select the desired item. 5. Press the OK button to confirm the setting. 6. Press the MENU button twice to close the menu. Menu item Function Delete Use this function to delete a single file or all files. [One]: Delete current singe file. [All]: Delete all files except locked files. Sound Adjust the volume level of video clip in playback mode.
Software Installation Installing the Software The bundled software CD has the drivers and software that come with car camcorder. Insert the CD into your CD-ROM drive. The autorun menu appears: to start the program. You can also click [Run] in the Windows Startup menu, enter “D:\autorun.exe” (where D is your CD-ROM drive letter) in the text box, and click [OK]. Install Driver 1. Click [Install Driver]. 2. Follow the on-screen instructions to install the drivers.