User Guide IdeaPad 3/IdeaPad 3i/IdeaPad Slim 3/IdeaPad Slim 3i series
Read this first Before using this documentation and the product it supports, ensure that you read and understand the following: • Generic Safety and Compliance Notices • Safety and Warranty Guide • Setup Guide First Edition (Januarary 2021) © Copyright Lenovo 2021. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS35F-05925.
Contents About this guide . . . . . . . . . . . . . iii Chapter 1. Meet your computer . . . . . 1 Front . . . . . . . . . . . . . Base . . . . . . . . . . . . . Left . . . . . . . . . . . . . Right . . . . . . . . . . . . . Features and specifications . . . . Statement on USB transfer rate . Operating environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 4 5 6 7 7 Chapter 2. Get started with your computer . . . . . . . . . . . . .
ii User Guide
About this guide • This guide applies to Lenovo product model(s) listed below. Illustrations in this guide may look slightly different from your product model.
iv User Guide
Chapter 1. Meet your computer Front 1. Microphones 2. Camera Capture or record sound and voice. • Capture still and moving images for taking photos, recording videos, and video chatting. • Capture your face images for face authentication. Note: Use Windows Hello to enroll your face for face authentication. 3. Camera cover slider Move the slider to cover or uncover the camera lens. Note: The camera cover helps you better protect your privacy. 4. Camera light If the light is on, the camera is in use.
Base 14–inch models: 1. Power light/Fingerprint reader* light The light shows power status of the computer. Note: It is positioned in the center of the button for devices without fingerprint reader. 2. Power button/Fingerprint reader* Press the button to turn on the computer or put the computer into sleep mode. Fingerprint reader* is available on power button. Enroll and read your fingerprint for user authentication. 3. Keyboard Enter characters and interact with programs.
15–inch and 17–inch models: 1. Power button/Fingerprint reader* Press the button to turn on the computer or put the computer into sleep mode. Fingerprint reader* is available on power button. Enroll and read your fingerprint for user authentication. 2. Power light/Fingerprint reader* light The light shows power status of the computer. Note: It is positioned in the center of the button for devices without fingerprint reader. 3.
Left 1. Power connector Connect to power with the included power cord and ac power adapter. 2. Charging light Indicate whether the computer is connected to ac power. • Solid white: connected to ac power; battery capacity 91%–100% • Solid amber: connected to ac power; battery capacity 1%–90% • Off: not connected to ac power 3. USB (3.2 Gen 1) Type-A connector Connect a USB-compatible device, such as a USB keyboard, a USB mouse, a USB storage device, or a USB printer. 4.
Right 1. Power light • On: the computer is turned on. • Off: the computer is turned off or in hibernation mode. • Blinking: the computer is in sleep mode. 2. Novo button Press the Novo button to open the Novo Button menu. From the menu, you can choose to open the UEFI/BIOS setup utility, the Boot menu, or the Windows startup options screen. 3. SD card slot Insert an SD card or a MultiMediaCard (MMC) into the slot for data transfer or storage. 4. USB 2.
Features and specifications Dimensions • Width: – 14–inch models: 324.2 mm (12.76 inches) – 15–inch models: 359.2 mm (14.14 inches) – 17–inch models: 398.8 mm (15.70 inches) • Depth: – 14–inch models: 215 mm (8.46 inches) – 15–inch models: 235.8 mm (9.28 inches) – 17–inch models: 274 mm (10.79 inches) • Thickness: 19.9 mm (0.78 inches) ac power adapter • Input: 100 V ac–240 V ac, 50 Hz–60 Hz • Output: 20 V dc, 3.
Connectors and slots • Combo audio jack • USB-C connector – Support data transfer rates up to 5 Gbps for USB 3.2 Gen 1 – Provide power output up to xx V and xx A • USB 3.2 Gen 1 Type-A connector – Support data transfer rates up to 5 Gbps for USB 3.2 Gen 1 • USB 2.
• At altitudes above 2438 m (8000 ft) – Maximum temperature when operating under the unpressurized condition: 31.3°C (88°F) Note: When you charge the battery, its temperature must be no lower than 10°C (50°F).
Chapter 2. Get started with your computer Get started with Windows 10 Learn the basics of Windows 10 and start working with it right away. For more information about Windows 10, see the Windows help information. Windows account You must create at least one account to use the Windows operating system. It can be either a local account or a Microsoft account. Local accounts A local account is created on a particular Windows-enabled device and it can only be used on that device.
Note: To add family members, you need to sign in with a Microsoft account. Step 3. Set the user name and password for the user account. Windows desktop 1. Account Change account settings, lock the computer, or sign out of the current account. 2. Documents Open the Documents folder, a default folder to save your received files. 3. Pictures Open the Pictures folder, a default folder to save your received pictures. 4. Settings Open Settings. 5.
• Press the Windows logo key on the keyboard. Open Control Panel • Open the Start menu and select Windows System ➙ Control Panel. • Use Windows Search. Open an app • Open the Start menu and select the app you want to open. • Use Windows Search. Windows Updates Microsoft periodically releases feature and security updates to the Windows operating system. Updates that are applicable to your version of Windows are downloaded automatically when your computer is connected to the Internet.
Connect to Wi-Fi networks If your computer includes a wireless LAN module, you can connect your computer to Wi-Fi® networks. The wireless LAN module on your computer may support different standards. For some countries or regions, use of 802.11ax may be disabled according to local regulations. Step 1. Click the network icon in the Windows notification area. A list of nearby networks is displayed. Note: If no network is displayed, check to ensure that the airplane mode is not turned on. Step 2.
Note: Alternatively, turn off the computer. Press Fn and the power button to open the Novo Button menu. Interact with your computer Keyboard hotkeys Some keys on the keyboard are printed with icons. These keys are called hotkeys and can be pressed alone or in combination with the Fn key to open certain apps or change certain settings quickly. The functions of the hotkeys are symbolized by the icons printed on them. Hotkey Function Mute/Unmute sound. Decrease/Increase system volume.
Press the NumLock key to enable or disable the numeric keypad.
Chapter 3. Explore your computer Manage power Use the information in this section to achieve the best balance between performance and power efficiency. Check the battery status The battery status icon or is in the Windows notification area. You can check the battery status, view the current power plan, and access battery settings quickly. Click the battery status icon to display the percentage of battery power remaining and change the power mode. A warning message is displayed when the battery is low.
Set performance mode Your computer can work in different performance modes. The performance and power consumption of the computer vary in different performance modes. Press Fn + Q to cycle through different performance modes. Change settings in UEFI/BIOS setup utility This section introduces what is UEFI/BIOS and the operations you can perform in its setup utility. What is UEFI/BIOS setup utility UEFI/BIOS is the first program that runs when a computer starts.
Set passwords in UEFI/BIOS setup utility This section introduces the types of passwords that you can set in the UEFI (Unified Extensible Firmware Interface) or BIOS (Basic Input/Output System) setup utility. Password types You can set various types of passwords in the UEFI/BIOS setup utility. Password type Pre-requisite Usage Administrator password No You must enter it to start the setup utility. User password The administrator password must be set.
Step 4. In the Enter New Password text box, enter the new password. Step 5. In the Confirm New Password text box, enter the new password again. Note: If you want to remove the password, press Enter in both text boxes without entering any character. Step 6. Select Exit ➙ Exit Saving Changes. If you remove the administrator password, the user password is also removed. Set user password You must set the administrator password before you can set the user password.
Step 4. Select Exit ➙ Exit Saving Changes. If the hard disk password is set, you must provide the correct password to start the operating system. Change or remove hard disk password Step 1. Open the UEFI/BIOS setup utility. Step 2. Select Security. Step 3. Change or remove the hard disk password. To change or remove master password, select Change Master Password and press Enter. Note: If you remove the master hard disk password, the user hard disk password is also removed.
• at any time (if initiated manually by the user) Note: In order for System Restore to create restore points, system protection must be turned on for the system drive. Create a system restore point manually You can use Windows System Restore to create a restore point at any time. Step 1. In the Windows 10 search box, enter Create a restore point and select the matched result. Step 2. Select the System Protection tab and then select Create.
When the recovery drive is created, you may see a Delete the recovery partition from your PC option. If you want to free up drive space on your computer, select it and then select Delete. Otherwise, select Finish. Use a recovery drive to restore or reset Windows If Windows cannot start, you can use a recovery drive (created in advance) to restore or reset Windows. Step 1. Connect the recovery drive to your computer; restart your computer and set it to start from the recovery drive.
22 User Guide
Chapter 4. Help and support Frequently asked questions How do I open the Control Panel? • Open the Start menu and select Windows System ➙ Control Panel. • Use Windows Search. How should I turn off my computer? Open the Start menu and select Power ➙ Shut down. How do I partition my storage drive? Refer to https://support.lenovo.com/solutions/ht503851 What should I do if my computer stops responding. Press and hold the power button until the computer turns off. Then restart the computer. 1.
Resources How to access? Lenovo Support Web site with the latest support information of the following: • Drivers and software • Diagnostic solutions Visit https://support.lenovo.com • Product and service warranty • Product and parts details • Knowledge base and frequently asked questions • Open the Start menu and select Get Help or Tips. • Use Windows Search or the Cortana® personal assistant. Windows help information • Microsoft support Web site: https:// support.microsoft.
Call Lenovo If you have tried to correct the problem yourself and still need help, you can call Lenovo Customer Support Center. Before you contact Lenovo Record product information and problem details before you contact Lenovo.
Purchase additional services During and after the warranty period, you can purchase additional services from Lenovo at https:// www.lenovo.com/services. Service availability and service name might vary by country or region.
Appendix A. Accessibility and ergonomic information This chapter provides information about accessibility and ergonomics. Accessibility information Lenovo is committed to providing users who have hearing, vision, and mobility limitations with greater access to information and technology. This section provides information about the ways these users can get the most out of their computer experience. You also can get the most up-to-date accessibility information from the following Web site: https://www.
keyboard with all the standard keys. You can select keys using the mouse or another pointing device, or you can tap to select the keys if your computer supports multi-touch screen. • High Contrast High Contrast is a feature that heightens the color contrast of some text and images on your screen. As a result, those items are more distinct and easier to identify. • Personalized keyboard Adjust keyboard settings to make your keyboard easier to use.
– Change the size of all the items on your screen. 1. Right-click a blank area on the desktop and then click Display settings ➙ Display. 2. Change the item size by following the on-screen instructions. For some applications, your configuration might not take effect until you sign out and then sign in again. – Change the size of the items on a Web page. Press and hold Ctrl, and then press the plus-sign key (+) to enlarge or the minus-sign key (–) to reduce the text size.
Display: Position the display to maintain a comfortable viewing distance of 510 mm to 760 mm (20 inches to 30 inches). Avoid glare or reflections on the display from overhead lighting or outside sources of light. Keep the display screen clean and set the brightness to levels that enable you to see the screen clearly. Press the brightness control keys to adjust display brightness. Head position: Keep your head and neck in a comfortable and neutral (vertical, or upright) position.
Note: Selected Lenovo computers are low blue-light certified. These computers are tested with night light turned on and color temperature set to the default value of 48. Appendix A.
32 User Guide
Appendix B. Compliance information This appendix provides compliance statements that are specific to your computer model. The Generic Safety and Compliance Notices contains compliance statements that are common to all Lenovo personal computer products. If your computer includes factory-preinstalled wireless modules, the Regulatory Notice contains compliance information for all the supported wireless modules. To download these publications, go to https://www.lenovo.com/compliance.
Lenovo is not responsible for any radio or television interference caused by using cables and connectors other than those recommended by Lenovo or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
Appendix C. Notices and trademarks Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary.
