Users Manual Part 3

5. Remove the M.2 solid-state drive:

a. Remove the screw that secures the M.2 solid-state drive

1 and then the drive pivots upward.

b. Carefully remove the drive out of the slot

2 .

6. Install a new M.2 solid-state drive:

a. Align the contact edge of the new M.2 solid-state drive with the key in the slot. Then, carefully insert

the drive into the slot at an angle of about 20 degrees

1 and pivot the M.2 solid-state drive

downward.

b. Install the screw to secure the M.2 solid-state drive

2 .

7. Reinstall the base cover assembly.

8. Turn over the computer. Connect the ac power adapter and all disconnected cables to the computer.

E14 Gen 2 and E15 Gen 2 User Guide