Users Manual Part 3

6. Install a new M.2 solid-state drive:
a. Align the contact edge of the new M.2 solid-state drive with the key in the slot. Then, carefully insert
the drive into the slot at an angle of about 20 degrees
1 and pivot the M.2 solid-state drive
downward
2 .
b. Install the screw to secure the M.2 solid-state drive
3 .
7. Reinstall the base cover assembly.
8. Turn over the computer. Connect the ac power adapter and all disconnected cables to the computer.
44
E14 Gen 2 and E15 Gen 2 User Guide