User's Guide

MT7921K

Install User Guideline: Part-I

Confidential B

MediaTek Confidential

Page 16 of 17

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

2.7 Antennas

The following antennas have been certified for use with this module; antennas of the same

type with equal or lower gain may also be used with this module except for operations within

the 5.925~7.125GHz band. Use of any other antenna with a lower or higher gain in this

band will require a separate reassessment through a Class II Permissive Change

application or new certification.

2.8 Label and compliance information

The final end product must be labeled in a visible area with the following: “Contains FCC ID:

RAS-MT7921K”. The grantee's FCC ID can be used only when all FCC compliance

requirements are met.

2.9 Information on test modes and additional testing requirements

This transmitter is tested in a standalone mobile RF exposure condition and any co-located or

simultaneous transmission with other transmitter(s) class II permissive change re-evaluation or

new certification.

2.10 Additional testing, Part 15 Subpart B disclaimer

This transmitter module is tested as a subsystem and its certification does not cover the FCC

Part 15 Subpart B (unintentional radiator) rule requirement applicable to the final host. The final

host will still need to be reassessed for compliance to this portion of rule requirements if

applicable.