User's Manual

-
25 -
TX/RX packet error rate.
Signal
Strength
1, 2 and 3
Shows the Receiving signal strength, you can choose to
display as percentage or dBm format.
Noise Strength
Shows the noise signal strength.
Transmit
Shows the current Link Speed and Throughput of the
transmit rate.
Receive
Shows the current Link Speed and Throughput of receive
rate.
Link Speed
Shows the current transmitting rate and receiving rate.
Throughput
Shows the transmitting and receiving throughput in the
unit of K bits/sec.
AP information
When you double click on the intended AP, you can see AP's detail information
that divides into three parts. They are General, WPS, CCX information. The
introduction is as following:
General
General information contain AP's SSID, MAC address,
Authentication Type, Encryption Type, Channel, Network Type,
Beacon Interval, Signal Strength and Supported Rates.
OK: Click this button to exit the information screen.