User's Manual

Warnings & Precautions
♦ Consult your local provider concerning any operational difficulties. Do not attempt to
repair the Wireless Blood Pressure Monitor on your own. Any modifications made to the
equipment void the device warranty and service contract obligations.
♦ Keep the Wireless Blood Pressure Monitor away from electro-magnetic emitting devices.
♦ Do not store the Wireless Blood Pressure Monitor in direct sunlight, at a high
temperature, or in a location with excessive humidity.
♦ Avoid any mechanical shock to the Wireless Blood Pressure Monitor such as a harsh
drop.
♦ Use of this device is not intended as a substitute for consulting with your physician, since
additional measurements to those supplied by the Wireless Blood Pressure Monitor may
be necessary.
Parts Identification
Operating the Wireless Blood Pressure Monitor
To initiate a monitoring session:
1. Place the Wireless Blood Pressure Monitor on a stable surface.
2. Insert the air connector plug firmly into the air socket.
3. Wrap the cuff around the upper arm about 2-3 cm (1 inch) above the elbow, as shown
below. Place the cuff directly against the skin, as clothing may cause the Wireless Blood
Pressure Monitor to record a faint heartbeat and result in an error.
4. Verify that the index on the arm cuff points within the proper fit range.