User's Manual

When pressurization is complete, the automatic exhaust mechanism gradually reduces
the pressure in the cuff.
When the measurement is complete, the buzzer sounds and the air is automatically released
from the cuff. The systolic pressure, diastolic pressure, and pulse rate are displayed.
8. Press the START button to turn off the device. The Wireless Blood Pressure Monitor
will automatically transmit the measurement. The display indicates that the device is
transferring the measurement.
After communication is completed, the device is turned off.
The Wireless Blood Pressure Monitor has an automatic Power Off function. If the monitor is
left on for about one minute after the measurement, it will automatically transmit the
measurement and turn itself off.
Do not allow anyone else to use your Wireless Blood Pressure Monitor. Remember:
Every time you use the Blood Pressure Monitor, the results are sent to your medical file. Use
of the device by another person will cause an accumulation of erroneous data in your
medical file.
Replacing Batteries
Replace all four batteries with new ones, when
is displayed on the display screen.
To replace the batteries in the Wireless Blood Pressure Monitor:
1. Remove the battery compartment cover. Push the cover up and lift at the arrow
indication.
Note
Please wait for about 10 minutes before measuring your blood pressure again.