User's Manual

Telephone Call Originated From the User
In case you want to place a call to the medical monitoring center.
♦ Press the red Call button on the MedicGate™ or generate a distress alarm from the
MiniClinic™.
♦ The MedicGate™ dials the medical monitoring center. The unit speakerphone will be
activated and you will hear the progress of the telephone call. The MedicGate™ green
LED will blink rapidly.
♦ In case the medical monitoring center is busy or does not answer the call at a given
moment, the MedicGate™ will dial the medical monitoring telephone numbers several
times, as configured by the medical monitoring center.
♦ When the call is answered you can talk with the medical monitoring center operator.
The MedicGate™ LED will become solid green
♦ The call continues as described previously.
Auto-Answering Incoming Call
If during a distress call the call was disconnected, the MedicGate™ will automatically
answer the call after 6 rings in the next 15 minutes and activate the hands-free speakerphone.
Installing (or Replacing) the Batteries
♦ Unscrew the battery compartment cover on the underside of the MedicGate™, as show
below.
♦ Place four new batteries with the positive (+) and negative (-) properly aligned with the
corresponding symbols in the battery compartment.
♦ Screw back the battery compartment cover on the underside of the MedicGate™.
♦ Please note that the batteries take 48 to fully recharge.