User's Manual

Handling Fault Conditions
♦ If configured to do so by the medical monitoring center the MedicGate™ can detect
that the telephone line is not connected, the LED becomes red and the MedicGate™
beeps twice every 120 seconds. Please call the monitoring center and report this
condition.
♦ If configured to do so by the medical monitoring center the MedicGate™ can beep
after receiving a medical measurement.
♦ When the MedicGate™ is not connected to the power, for example during electricity
outage, the MedicGate™ LED becomes blinking red to indicate this condition. Verify
that the power adapter is connected properly.
♦ When the MedicGate™ is not connected to the power and the backup battery is almost
out of change, the LED becomes red. The MedicGate™ automatically reports this
condition to the medical monitoring center.
Specifications
Environment
Operating condition +10˚C to +40˚C / 30% RH to 85% RH
Storage condition -10˚C to +55˚C / 30% RH to 85% RH
Dimensions Approx. 145[W] x 55[H] x 175 [D] mm
Weight Approx. 45g, excluding batteries
Power Supply/bat
Power 9V / 400 mA from regulated DC power
supply
Backup batteries 4 x 1.2V 1800 mAH NiMH rechargeable
batteries
Radio Frequency communication
Frequency
433.92 MHz (EU)
866.3 MHz (EU)
915 MHz (USA)
Max transmission power
10 dbm (EIRP) at 433.92 MHz and 866.3
MHz.
-1 dbm (EIRP) at 915 MHz
Bandwidth
60 kHz max.
Transmission range
200 m (free space)