User's Manual
2
6. How to connect with your mobile device
1) Connected by USB Cable
① Turn on the power in the Smart Pulse U device and connect it to the Mobile Device by a USB cable. When it’s connected, the
application will be automatically performed.
* iPhone & iPad support Bluetooth Communication Only.
2) Connected by Bluetooth
① Activate ‘Bluetooth’ function in your mobile device.
② Turn on the power in the Smart Pulse U device.
③ Run the App. And, the Bluetooth Pairing will proceed automatically.
④ Once the Bluetooth Pairing works properly, the ‘Bluetooth icon’ ( ) appears at the top-right of screen.
If the Pairing fails, close the application completely, and then try again.
For the Android only, press the “Refresh icon’ ( ) at the top-right of the screen for Bluetooth re-pairing.
7. User Registration
1) Register as a member
(For both App & Web/Cloud Service USE)
① In order to use both Smart Pulse App and Web/Cloud Service, the member registration is required.
② Tap the ‘Sign Up’ button at the bottom of the main screen to proceed a member registration.
Also, you can easily register through the ‘Google’ or ‘Facebook’ account.
③ In the Sign Up screen, fill out the required information and additional information to complete member registration.
④ After registration, login to an account and start the measurement.
- Web/Cloud Service provides Trend Analysis/Statistical Management/Healthcare Solution for your healthy life.
- The ID and Password are the same on Smart Pulse App and Web/Cloud Service.
- Web/Cloud Service Website –
www.mcaretech.co.kr
2) Register as a non-member
(For App USE ONLY)
① Tap the ‘Non-member’ button at the bottom of the main screen to proceed a non-member registration.
② New Users: Tap the ‘+New User’ button and fill out the information for: Gender, Reference Type, Name and Year of birth. * For the
Reference Type, select ASIA for Asian and WEST for Westerner.
③ Existing Users: Select the ‘User Name’ in the user list to start the measurement.
*The User information can be deleted by the ‘Edit’ button at the top-right of the screen.
8. How to use “Smart Pulse”
1) History
① On the History Tab, you can check the accumulated measurement data by days/weeks/months.
2) Measurement
① On the Measurement Tab, select the ‘Arterial Health’ mode to measure the arterial health only and select the ‘Stress’ mode to
measure Stress and Vascular Health simultaneously.
② Insert the left index finger and tap the “START” button.
*Insert the left index finger into the device. Right hand or other fingers are not clinically verified, therefore the test result will not be
correct using them.
③ Stress measurement shall take 2 minutes and 30 seconds and Vascular Health measurement will be approximately 30 seconds.
④ When the measurement is completed, it will be automatically moved to the result screen.
⑤ Pull the finger out of the device after the measurement.
3) Breathing Training
① Go to the ‘Training’ Tab and select the ‘Breathing Training’ mode.