Specifications

CONNECTING THE 5.1 SYSTEM

Please read the chapter "Safety and Service" starting on page 2 before

connecting your system.

1. CONNECTING THE LOUDSPEAKERS

After having positioned the components connect the cables of the loud-

speakers. Use the drawing on page 6 and the table below as guide:

Loudspeaker Connection at the 5.1 System ( p. 6) Loudspeaker plug

Front left 5, FRONT L – RCA White RCA black

Front right 6, FRONT R – RCA Red RCA black

Rear left 7, REAR L – RCA White RCA black

Rear right 8, REAR R – RCA Red RCA black

Center 9, CENTER – RCA Yellow RCA black

2. CONNECTING THE SOUND SOURCE

Your 5.1 system can take input from a PC with 5.1 outputs, a DVD-player, or

another suitable source with the corresponding output connections.

Â Tip: 1/8" stereo female plugs are required. When not available,

then adapters are required.

Â Attention: Digital connections are not supported and can dam-

age the device.

1. Locate the output connections of the sound source (sound card, DVD-player) and

connect the device with the included cables. The connections are usually color-

coded.

The colors might slightly vary. Check the manual of your device as a safeguard.

Use below table as a guide:

Connection on the 5.1 system (p. 6) Connection on the source

2, Front R - RCA red

2, Front L - RCA white

1/8" stereo plug

3, Rear R - RCA red

3, Rear L - RCA white

1/8" stereo plug

4, Center C – white

4, Subwoofer – red

1/8" stereo plug

3. CONNECTING THE POWER ADAPTER

Connect the supplied power adapter to the AC In connector on your 5.1

system (see page 6,)11) and insert the power plug into an easily acces-

sible power outlet. Do not switch on the 5.1 system yet.