Technical data

DVD-/HDD-RECORDER – MD 80857 13
CONNECTIONS AND CONNECTION OPTIONS
About the component connections
If your television has a "Progressive Scan" function the best image quality
will be achieved via the component outputs (Y, CB/PB, Cr/Pr on the rear of
the device). An increased image frequency is created using the Progressive
Scan procedure. This reduces flickering images to a minimum and displays
movements in a more fluid manner.
It goes without saying that your TV must be able to process this format for
it to be used. The Progressive Scan transfer only works when connecting
the component connections (
COMPONENT VIDEO OUT) with a
three-pole component cable (red/blue/green). The PROGRESSIVE SCAN
does not work with a SCART connection.
To transfer the sound you can again use the audio cinch cable (red/white):
To playback the Progressive Scan image you have to press the
NTSC/PAL
button on the remote control to select the
Progressive Scan format.
You can only select this format if the
YCrCb On
menu option is activated in the SETUP > VIDEO > Video Output
menu.
Only activate this point if your TV has the "Progressive Scan" function
otherwise the picture goes black.
Instead of the TV you can also connect a projector, for example.
Select the relevant
Progressive Scan
input for this
connection to your
TV.