Technical data

DVD-/HDD-RECORDER – MD 80857 21
INITIAL OPERATION
TV-System (TV-Sys)
Here you select the TV standard for your region if no channels are found
during channel search using the preset standard.
 PAL-I is the TV standard in Great Britain, Ireland and most
Commonwealth countries.
 PAL-DK is the TV standard in Eastern Europe and Russia
 PAL-BG is the TV standard in most Western European countries (e. g.
Netherlands, Germany, Scandinavia) except France.
Mode and CH/MHz
From the Mode option you can switch between CH (for channel) or
S_CH (for special channel) and frequency.
If you select
Freq. the frequency of the selected channel is then displayed
in the following option under
MHz.
Using the number buttons you can now directly enter a channel frequency
in order to add additional channels to the programme list or to manually
edit existing channel frequencies.
Example
After initial setup a channel is located in programme space 4 with a
transmission frequency of e. g. 217.25 MHz.
` If you are not receiving this channel properly or at all press the
PROGRAM button on the remote control and move the cursor bar with
the or arrow buttons to the programme space that you want to
edit or reprogram. The channel appears in the background.
` In the
MODE menu option select the Freq. entry. The frequency of the
selected channel is then displayed in the following option under
MHz.
` Now enter the channel frequency that your cable provider gave you for
this channel (e. g. 219.25 MHz) using the number buttons.
` Then move the cursor bar using the or arrow buttons to the
Fine
Tune
entry. Using the and arrow keys you can edit the channel
frequency up or down by steps of -16 to +16 so that the image
improves.
You can find out the exact frequency from your cable provider or the
TV channel itself.