Technical data

DVD-/HDD-RECORDER – MD 80857 23
DVD AND CD PLAYBACK
Inserting a disc
Make sure that there is about 15 cm of space in front of the disc
compartment so that it can open without hindrance.
` Switch the unit on and press
OPEN/CLOSE.
` Insert a disc into the disc compartment with the title side upwards.
Make sure to place the disc in the middle of the disk holder so that it
does not stick when you close the compartment.
` Press the
OPEN/CLOSE button. The disc compartment closes.
DVDs start playing automatically after a few seconds. The on-screen
display depends on the type of disc (DVD, video CD, music CD, MP3 or
JPEG CD) and its format.
You may need to press
PLAY or a menu may appear in which you need to
make a selection using the navigation keys.
Setting the volume
As a rule, you control the volume from the output device, ( the TV for
example).
` Within the volume set on the output device you can change the volume
with the
VOL buttons.
` Press the
MUTE button to switch the sound off completely and on
again. When mute is active a red bar appears on the lower edge of the
screen.
Playback functions (DVD, VCD, CD, DIVX, MPEG4)
PLAY
` Press PLAY to start playback. The play icon is displayed on the screen.
PAUSE
` You can interrupt the play mode by pressing PAUSE. The pause icon is
displayed on the screen .
STEP (DVD and VCD only)
` Press STEP to move the stopped picture forward by one individual
frame each time you press the button.
STOP
` Press STOP once to stop playback. If you now press PLAY playback
continues from the same location.
Special screen message
If you try to activate a function that is not available in the current mode or does not exist on the
disc, the following on-screen message appears. The message disappears after a few seconds.