Technical data

DVD-/HDD-RECORDER – MD 80857 33
RECORDING TO DVD/HARD DISK
Starting a manual recording
This is how to make a manual recording:
` Press the
HDD/DVDbutton to select whether you want to record to the
hard disk or DVD.
If you want to record to a DVD insert a previously formatted DVD+R or
DVD+RW disc into the recorder (Refer to “Formatting discs”, P. 31). The
DVD's title menu is displayed. Press the
STOP button twice to change
to the stop mode.
` In the RECORD>RECORD QUALITY setup menu select the desired
recording speed.
` Press the
SOURCE button to select the input source from where you
wish to record:
P1 : to record from the TV if there is an aerial connection (record from
tuner). Use the
CHANNEL buttons to select the channel from where you
wish to record (
P 1, P2, P 3 ...);
CVBS 1: for a device that is connected with the DVD/HDD recorder
via the SCART IN socket or the AV 1 IN socket;
CVBS 2: for a device that is connected with the DVD/HDD recorder via
the AV 2 IN socket (front of device);
S-VID1: for a device that is connected with the DVD/HDD recorder via
the S-Video 1 socket;
S-VID2: for a device that is connected with the DVD/HDD recorder via
the S-Video 2 socket (front of device);
SCART: for an external device that is connected to the DVD/HDD
recorder only via the SCART cable (no aerial connection);
DV: for a device that is connected with the DVD/HDD recorder via the
DV IN socket (digital video camera).
` Press
RECORD on the remote control or front of the device to start the
recording.
` You can pause and restart the recording by pressing
PAUSE.
` Press
STOP to finish recording. Please wait until the "Please Wait ..."
screen message disappears (after approx. 15-17 seconds). Your
recording has now finished.
You can now playback the recording by changing to the DVD/HDD title
menu by pressing PLAY or Title and starting playback from there (Refer to
“Opening title menus/viewing + editing recordings”, P. 38).
If you have recorded to a DVD+R please note that the DVD may not
be playable on other devices until you have finalised it Refer to
“Finalise DVD”, P. 52.
If you use a SAT
receiver or a DVB-T
box,
you have to select the
channel on this device
(not on the DVD/HDD
receiver).