Technical data

RECORDING TO DVD/HARD DISK
34
Notes on recording
The DVD/HDD recorder pauses the recording automatically if no signal is
received from the connected video device. This may occur if, for example,
a DVD player is switched off or there is no cable connection.
If you try to record from an external device which contains a copy-
protected DVD/CD, it will not be possible to transfer data to the DVD/HDD
recorder. The screen then shows the message: "DISC COPY PROTECTED
PLEASE WAIT...". If this occurs switch the device off and on again.
Automatic recording ("TIMER" menu)
You can programme up to 8 timed recordings with your DVD/HDD
recorder. This is done as follows:
` Ensure that the time and date are set correctly and if necessary reset
them from
SETUP > SYSTEM > Set Time.
` If you want to record to DVD, insert a pre-formatted DVD+R or DVD+RW
into the recorder.
` Check whether there is enough room on the DVD or hard disk.
` Press
SETUP on your remote control to open the setup menu.
` Select the
RECORD menu and confirm the Schedule Record
option by pressing .
` Select the first free line if it is not already highlighted.
` Move the cursor to the date field with the arrow key. An entry field for
the VIDEOPlus+ system opens.
` Confirm the entry field by pressing
ENTERin order to move directly
to the VIDEOPlus+ menu. If you do not want to use a VIDEOPlus+
number end the query by confirming the entry field by pressing
ENTER. With regard to VIDEOPlus+ programming please refer to
Page 36,“VIDEOPlus+ programming”.
Set date for the recording (DATE)
` You move from field to field by pressing or . Set the day, month
and year using the number buttons.
` You can select a recording rhythm by pressing or . In this case the
recorder does not record on a specific date; instead it takes the time
settings from the stated recording rhythm. The potential recording
settings are:
Weekly Sun, -Sat, -Fri, -Thu, -Wed, -Tue, -Mon /
Daily / Mon-Fri
.
Set the start time for the recording (START)
` Use the or buttons to move the cursor to the start field.
` Set the desired start time for the recording by pressing the or or
the number buttons.
Only files that you yourself have created or for which you have received the appropriate usage rights
from the owner may be copied or coded with your DVD/HDD recorder. If you infringe these rights
you could be liable to prosecution or subject to a claim from the owners.