Technical data

RECORDING TO DVD/HARD DISK
36
Activate PDC/VPS
` Use the or buttons to move the cursor to the PDC field.
Use the or buttons to set the PDC function for the recording to On
if you have used a PDC/VPS time from your TV guide.
Set the PDC function to Off if you do not want to use PDC/VPS time
otherwise the recording may not start.
VIDEOPlus+ programming
You can open the VIDEOPlus+ programming menu either via the RECORD
menu or by pressing the
VIDEO+ button.
The following window opens:
` Enter the VIDEOPlus+ number, which may have up to nine digits and is
taken from the programme magazine, using the number buttons.
` Then press the arrow button to change to the next window. A
window for confirming the programme location from where the
programme is to be recorded is displayed. Change the memory space
using the and arrow keys.
` Then confirm the field by pressing
ENTER to adopt the setting.
` Now set the recording quality in the
QUALITY field using the and
buttons.
` Set the destination for your recording to hard disk or DVD in the
DEST.
field.
` Set the sound channel for your recording in the
NICAM field (Refer to
“Set NICAM settings (NICAM)”, P. 35).
` Set the PDC/VPS function in the PDC field to
ON or OFF (Refer to
“Activate PDC/VPS”, P. 36).
` In the
SOURCE field you can again set the programme source from
where the recording will be taken. The channel name is displayed
below the programme space.