Technical data

DVD-/HDD-RECORDER – MD 80857 41
OPENING TITLE MENUS/VIEWING + EDITING RECORDINGS
` If several chapters are to be displayed you can select the COMBINE
entry to combine the current chapter with the next one.
Press
RETURN to go back to the title menu.
Import – Copy title to the hard disk
Select the IMPORT entry to copy the selected titles to the hard disk.
` Ensure that there is adequate space on the hard disk and confirm the
subsequent enquiry with
YES by pressing ENTER.
You can only record DVDs to the hard disk if they were recorded on
this device.
Editing DVD recordings during playback
By default titles are divided into 5 minute chapters during recording to
help you to locate certain points. (You can change this default setting in
SETUP > RECORD > DVD Auto Chap.)
` During playback press the
EDIT button to open the "Title Edit" menu.
Insert chapter
Use this option if you subsequently want to divide a recording into
chapters to facilitate finding individual places.
` Select the
Insert Chapter option.
` When the title reaches the place where you want a new chapter to start
press
ENTER.
The screen indicates that a new chapter was started.
Change thumbnail
You can change the image that is displayed as a thumbnail for the
recording in the title menu.
` Play the title and go to the
Change Thumbnailoption.
` Play the title up to the point when you see the picture that you want to
use as a thumbnail and press
ENTER.
When you open the title menu again the title contains the image selected.
Editing hard disk recordings
The hard disk (HDD) title menu is shown as follows (for two recordings)
(the title that is currently selected plays in the background):
` If you have made several recordings select the desired one by pressing
an arrow key.
Press
PLAY again to playback the recording.
The recordings on the hard disk can be deleted from the menu, copied to
DVD or renamed.