Technical data

DVD-/HDD-RECORDER – MD 80857 45
SETTINGS IN THE SETUP MENU
` To use the factory reset confirm START by pressing ENTER.
` In the subsequent "
Perform Factory Reset" dialogue box go to the
field and press
ENTER. Press ( ) to cancel the process.
For the subsequent four steps please refer to “Set menu language and
country”,Page 19 onwards.
Please note that a new password is retained even after completing
the factory reset.
Country Setup
You select here the country in which the DVD/HDD recorder is operated.
You can extend the list of countries by navigating to the top option by
pressing or to the lowest option by pressing .
"VIDEO" menu
Channel Scan
You can start the channel scan here.
Normally the channel scan is carried out on initial setup; please also refer
to “Changing programme space”,Page 20.
Adding/deleting channels (Add/Del Channel)
You can reprogram the programme spaces and set the individual channels
here.
The options are described in detail in the “Change programme presets/
edit channels”,Page 20 chapter.
Proportion (Screen Format)
4:3 letterbox : Select this setting to display a film in 16:9 format on a
traditional TV with 4:3 format. The image is shown with a
black bar at the top and bottom edges.
4:3 Pan Scan : Select this setting to display programmes in the normal
4:3 format on a 4:3 TV. 16:9 format programmes are
shown full-screen without disturbing bars but the edges
of the image are cut off.
16:9 Wide: Select this setting to output to a wide-screen TV in 16:9
format.