Technical data

SETTINGS IN THE SETUP MENU
46
Video output
The setting depends on how your TV (or other video device) is connected
to the DVD/HDD recorder.
YCrCb: Select this setting only if the TV is connected to the DVD/
HDD recorder via the component connections and if the
TV can display the Progressive Scan picture format (please
also refer to “About the component
connections”,Page 13).
RGB: Select this setting if the TV is connected to the DVD/HDD
recorder via a SCART cable and your TV support the RGB
colour system.
YCrCb/RGB Off: Select this setting only if the TV is connected with
the DVD/HDD recorder via the video cinch cable.
WARNING!
Never select the YCrCb setting for other connection types! This will
produce a black screen!
AUDIO menu
In this menu you can set the format for the audio output that matches the
output device (TV, amplifier, etc.)
Speaker Setup
In the Speaker Setup sub-menu you can set the size, volume, delay and
frequency range for each individual channel.