Operation Manual

14 of 66
• Do not exchange the supplied cable for another one. Use only
the supplied cable as this cable has been extensively tested in
our laboratory.
• In addition, when connecting your peripherals only use the
connecting cables supplied with those devices.
• Ensure that all connection cables are connected to their
corresponding peripheral device to avoid any interference
radiation. Disconnect any cables that are not required.
2.10. Information about the Touchpad
• The touchpad is operated with the thumb or another finger
and reacts to the energy given out by the skin. Do not use
pens or other objects as these can damage your touchpad.
• Dust or grease on the touchpad can affect its sensitivity.
Remove the dust or grease from the surface of the touch pad
with a strip of adhesive tape.
2.11. Notes on the integrated battery
CAUTION!
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of
used batteries according to the manufacturer‘s
instructions. Never attempt to disassemble or
reassemble. Do not heat up above 60°C (140°F). Do
not dispose of in fire or directly short circuit.
This device contains an integrated battery. To increase the
lifespan and performance of your battery and also to ensure
reliable operation, you should also heed the following
instructions:
• Use only the supplied mains adaptor to charge the battery.
Make sure (via the notebook display or acoustic signal) that
the battery is fully discharged before charging it again.