Operation Manual

42 of 66
12.4. Flight Mode
In flight mode, all wireless connections (e.g. WLAN, Bluetooth) are disabled. Flight
mode is disabled by default to ensure that all wireless connections are available.
Move the mouse pointer into the top right or bottom corner of the display and
click
Settings.
Next, click Change PC settings.
Click Wireless.
Now enable or disable Flight mode here. Alternatively, use the Fn +
keyboard shortcut to open flight mode.
Once flight mode is enabled, a small aeroplane is displayed in the traditional
desktop task bar. You can also enable/disable flight mode by clicking this icon.
13. Multimedia Card Reader
Memory cards are media that are used, e.g. in the field of digital photography, and
are gradually replacing the diskette. The shape and capacity of a memory card can
vary depending on the manufacturer.
Your Notebook supports the following formats:
• MMC (MultiMediaCard)
SD (Secure Digital), SDHC, SDXC
When inserting the memory cards, ensure that the contacts are pointing in the right
direction, as specified in the list below. Inserting a card incorrectly may damage the
card reader and/or the card.
Card Type Connection Contacts
SD (Secure Digital) pointing downwards
MMC (MultiMediaCard) pointing downwards
13.1. Inserting a Memory Card
PLEASE NOTE!
The memory cards can only be inserted in one direction. Please observe
the instructions in the section above.
Slide the card in as far as it will go.
13.2. Removing Memory Cards
To remove SD/MMC cards, first push these into the socket to release the safety
catch.
Now pull the card out of the slot and store it properly.